Hi All,
Lookiing for a dash assembly for my 73 Super Bug minus all the switches,gauges etc, mine is looking a bit sad! Cheers Ron
herbgrinder Casual Dubber
47 posts · joined Jul 2008 ·
WTB - Dash Assembly - 73 S/Bug - SA
Bizarre Moderator The artist formerly known as blue74l
12,785 posts · joined Aug 2002 ·
BIG job to change over
I saw Pete Klaack use a felt to cover a cruddy dash the other day
Came up looking a million dollars
A LOT easier than trying to swap a dash
I will try and find EXACTLY what it was
Either that or those fibreglass ones look ok
Just make sure you pull the outer vents and pop them in the cover
I saw Pete Klaack use a felt to cover a cruddy dash the other day
Came up looking a million dollars
A LOT easier than trying to swap a dash
I will try and find EXACTLY what it was
Either that or those fibreglass ones look ok
Just make sure you pull the outer vents and pop them in the cover
Futue te ipsum!!!
beetleboyjeff Custom Title Time!
1,790 posts · joined Feb 2009 ·
I sent my L bug dash to a mob in Brisbane called Dashboard Restorations at http://www.dashboardrestorations.com.au/index.htm
I modified it a bit first, and this is how it worked out if the photos will attach
From your ole' mate Jeff
I modified it a bit first, and this is how it worked out if the photos will attach
From your ole' mate Jeff
3 attachments · Log in to view
From your ole' mate Jeff
Bizarre Moderator The artist formerly known as blue74l
12,785 posts · joined Aug 2002 ·
WOW.......that came up brilliant
Futue te ipsum!!!
beetleboyjeff Custom Title Time!
1,790 posts · joined Feb 2009 ·
I am pretty damn happy with it.
From your ole' mate Jeff
From your ole' mate Jeff
From your ole' mate Jeff
herbgrinder Casual Dubber
47 posts · joined Jul 2008 ·
Hi all,
Great job on the dash Jef ! What sort of money ballpark? Thanks Bizarre for the info I would be keen to know what material was used.Cheers Ron
Great job on the dash Jef ! What sort of money ballpark? Thanks Bizarre for the info I would be keen to know what material was used.Cheers Ron
beetleboyjeff Custom Title Time!
1,790 posts · joined Feb 2009 ·
I had it done in early 2005, and can't find the invoice. I think it was about $600, but that also included the face of the guage pod as in this photo, and it was the much bigger L bug dash. Their website does give quite a good run-down of how they do them.
1 attachment · Log in to view
From your ole' mate Jeff
annosL Officially Full-On Dubber
378 posts · joined Dec 2008 ·
I had same problem an used Sikaflex-227 to fill cracks and raised the surface by 2-3 mm. I then I used a sanding block to level, very tedious but a reasonable result. Because the leather look texture was lost I sprayed with plastic paint then top coated with charcoal textured paint. Took a couple of weeks for the Sikaflex to cure enough to sand, the result is not perfect but 100% better than it was, all up costs about sixty dollars.
3 attachments · Log in to view
Bizarre Moderator The artist formerly known as blue74l
12,785 posts · joined Aug 2002 ·
WOW (again)
Damn their is some creative people out there
Damn their is some creative people out there
Futue te ipsum!!!
Bizarre Moderator The artist formerly known as blue74l
12,785 posts · joined Aug 2002 ·
Spoke to Pete Klaack and he uses speaker box felt
This is one he prepared earlier
http://forums.aussieveedubbers.com/viewtopic.php?tid=55839&page=2
This is one he prepared earlier
http://forums.aussieveedubbers.com/viewtopic.php?tid=55839&page=2
Futue te ipsum!!!