Skip to content
Aussieveedubbers

Dipstick sender

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

waltermitty Legend when my beer goggles are on

1,993 posts · joined Aug 2002 ·

#63910
I have a dipstick sender (-BERG) and thought that I might give it a go. Its fairly obvious to me where i install it but where do you connect the wire too?
Thanks . MitCheLl😎
23 windows ...8 too many!

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#63911
On the temp gauge there should be 2 terminals.

One goes to the sender unit and the other side goes to a positive on the fuse box that activates when the ignition is turned on.

The temp sender sends a resistance signal to the gauge that makes it moove when the oil temp increases.
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Keith Haeusler Seriously Crusin Dubber

168 posts · joined Sep 2002 ·

#63929
Mitchell,
The wire hooks to the oil pressure light wire. Use a piggy back from the o/p switch to attach both wires. Keith.