Aussieveedubbers

wedgemate fly wheel

0 likes

turboboy Seriously Crusin Dubber

117 posts · joined Sep 2008 · 15 Jun 2010, 2:11 pm

#784934

Howdy
is it possible to machine a stock ended crank to fit a wedgemate fly wheel or do you have to buy a matched pair.
If it's possible what are the dimension's of the cuts to the crank that have to be made. I know it will have to match the f/wheel but are they all different (brand wise) or the same.

Cheer's😎

dangerous 23 Windows of Awesome

5,901 posts · joined Jan 2005 · 15 Jun 2010, 3:22 pm

#784947

Most are done to match a specific crank and FW combo.
There are a few different angles, but generally it is around 3 degrees.
Most weld the FW and the crank is turned to match,
but some times the crank nitriding is very hard, so it needs wlding also.

It IS possible to match a stock crank, but you may end up having to weld.
And the crank dowel pins must be removed too.(PITA on some aftermarket cranks).

westi wrote:That's mad Alan.