donn wrote:I purchased a carbie on ebay (because I could, don't know why other than for that) but before I try to fit it I have a couple of questions.
1. will it be ok on my 1600
2. If not what do I need to do to make it ok (if there is anything that can be done)
3. There is an electrical connection at the base of the unit alongside the drain plug on the bowl, this doesn't exist on the one I have on at the moment (I have been told the existing one needs a complete rebuild) what is this connection for.
Hi Don
the PICT31 is off a single port engine like the 1300 or 1500 beetle..
they don't have enough vacuum for a SVDA distributor..
but should work with a vacuum only or 009 distributor..
its strange your old carby doesn't have an electromagnetic cutoff solenoid..
to switch off the fuel when You turn the key off..
Beetles had them since the early 60s..
cheers
LEE
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---