Skip to content
Aussieveedubbers

Quick shift little help please asap.!!

0 likes
Share Share on Facebook Share on X Share on Reddit

jjwebb123 Wolfsburg Wizard

617 posts ยท joined Aug 2009 ยท

#794149
Hey everyone.
Need just a little help,shouldn't take long.
I just received a empi quick shift kit.(thanks micks motors)
i have an understanding of how they work,but if someone could explain where the little round bubble looking piece goes that would be heaps of help.there is an adjustment plate,2 bolts ,and this little round thingo.thats it.I need it in by tomorrow.๐Ÿฅฒ
let me know if i am too confusing.๐Ÿ˜‚

Thanks
p.s-i feel like i real dill asking this.๐Ÿคช
"A car for the people, an affordable Volkswagen, would bring great joy to the masses and the problems of building such a car must be faced with courage."
Adolf Hitler At opening of 1934 Berlin Auto Show

PAZZAN Wolfsburg Wizard

592 posts ยท joined Jan 2008 ยท

#794153
slide it down the gear shaft it sit on top of the original if I remember correctly

jjwebb123 Wolfsburg Wizard

617 posts ยท joined Aug 2009 ยท

#794155
so unscrew top knob and slide down until it stops on top of old doo-dad?๐Ÿ˜
"A car for the people, an affordable Volkswagen, would bring great joy to the masses and the problems of building such a car must be faced with courage."
Adolf Hitler At opening of 1934 Berlin Auto Show

bajachris88 The international telephone dialing code for Antarctica is 6

6,661 posts ยท joined Apr 2005 ยท

#794159
yep! thats all u do man. and then put the outter housing back over... (you know... the very outside middle piece that surrounds the bottom of the gear lever)
(รด_!_/รด) (รด_!_/รด)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. ๐Ÿ‘
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!

bajachris88 The international telephone dialing code for Antarctica is 6

6,661 posts ยท joined Apr 2005 ยท

#794160
oh! and don't forget the lube!
(รด_!_/รด) (รด_!_/รด)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. ๐Ÿ‘
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!

jjwebb123 Wolfsburg Wizard

617 posts ยท joined Aug 2009 ยท

#794168
yeh just got back from test driving.
all good.will take a bit to get used to.Its a lot harsher than the normal
easy smooth vee-dub change.but it is alot quicker.forgot lube.will fix that up when i can.๐Ÿ™
Thanks for your quick help.
๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘
"A car for the people, an affordable Volkswagen, would bring great joy to the masses and the problems of building such a car must be faced with courage."
Adolf Hitler At opening of 1934 Berlin Auto Show

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts ยท joined Aug 2002 ยท

#794197
jjwebb123 wrote:Hey everyone.
Need just a little help,shouldn't take long.
I just received a empi quick shift kit.(thanks micks motors)
i have an understanding of how they work,but if someone could explain where the little round bubble looking piece goes that would be heaps of help.there is an adjustment plate,2 bolts ,and this little round thingo.thats it.I need it in by tomorrow.๐Ÿฅฒ
lThanks

All it actually does is move the bottom of the gearshifter down lower, so more leverage is used...
under the gearshifter..

cheers

LEE

PS: If You can find all the gears after fitting, You are doing OK
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

sander288 "Bolt-on Master"

1,404 posts ยท joined Aug 2008 ยท

#794204
What lee said is right, for months I had to push down to go from 2nd to 3rd !!! Got it in good now though..
BMW R65 LS
1967 1300 Deluxe
Swing-axles FTW โ—

1500S Custom Title Time!

1,418 posts ยท joined Mar 2005 ยท

#794246
Technically what you are doing is increasing the lever length from the pivot ball by adding the ball over the gear lever. The packing piece which raises the housing above the tunnel should keep the ball which engages in the shift rod socket in the same place. If it is adjusted right all gears should select ok.

The main problem with the quick shift is that you can get some crunching as it can put a bit more load on the syncros, depending how quick you rip it through the gears, especially on our older high mileage gearboxes.

DH

jjwebb123 Wolfsburg Wizard

617 posts ยท joined Aug 2009 ยท

#794297
yeh im not sure if i have grown to like it yet.
i am so used to the smooth vee dub change.But i intend to stick it
out for a bit longer.
Thanks for your help,.๐Ÿ‘
"A car for the people, an affordable Volkswagen, would bring great joy to the masses and the problems of building such a car must be faced with courage."
Adolf Hitler At opening of 1934 Berlin Auto Show