Hey guys.
Well looking at putting some fuch`s on the type 3 and am after some info on the required studd pattern change.
Cant seem to find anything by searching..
any info or links on the process would be greatly appreciated.
Cheers Vice
Currently driving my 1st VW.. 67 type 3 1600..And loving it..
Buy new uniform thickness blank rotors and get them drilled for 5 x 130 PCD
I do know Sherman has them
At Valla they were about $100 per drum + $85 for drilling and studding
I am sure others in Melbourne do it - but count on $750is for all for wheels
Futue te ipsum!!!
Hey Hey Vice,
The stud pattern for Fuchs - 130 x 5
The offset for Fuchs rims varies -
Original Fuchs
15 x 6 - 36mm
15 x 5.5 - 42mm
15 x 4.5 - 42mm
Flat 4 replica Fuchs
15 x 5.5 - 45mm
15 x 4.5 - 45mm
The higher the offset, the closer the wheel sits to the shock tower, eg: 42mm
The lower the offset, the closer the wheel sits to the guard, eg: 36mm.
Zayus
Thanks for the info guys..
Is this Sherman a shop ? or a guy on here ?
Cheers
Currently driving my 1st VW.. 67 type 3 1600..And loving it..
Where would you guys buy blank rotors in Melb or over the net ?
Cheers Vice
Currently driving my 1st VW.. 67 type 3 1600..And loving it..
classicveedub have em
or sherman....
http://www.volksconversions.com.au/Cheers Man.. I found volksconversions after a bit of a google. 🙂
Currently driving my 1st VW.. 67 type 3 1600..And loving it..
Has anyone used the gear from Sherman?
How is the quality/longevity?
Pics??
Reub
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲
