Kappage Casual Dubber
23 posts · joined Aug 2008 ·
Ive been told to tighten it up i can replace the bushes on the gear shift linkages and jsut wondering how to do it and how much its going to cost? at the moment your lucky to find any gears.
Gear Shift like poridge
Bizarre Moderator The artist formerly known as blue74l
12,787 posts · joined Aug 2002 ·
costs about $15.00 in parts and a couple of hours if you are a learner
read here
http://forums.aussieveedubbers.com/viewtopic.php?tid=68078
http://www.vw-resource.com/shifter_bushing.html
http://www.vw-resource.com/shift_coupler.html
It will be the read coupler - but do the bush at the front while you are at it
read here
http://forums.aussieveedubbers.com/viewtopic.php?tid=68078
http://www.vw-resource.com/shifter_bushing.html
http://www.vw-resource.com/shift_coupler.html
It will be the read coupler - but do the bush at the front while you are at it
Futue te ipsum!!!
68AutoBug Beetle Restorer - Experience over 138\% - YIKES --
11,654 posts · joined Aug 2002 ·
WOW THAT IS BAD....Kappage wrote:Ive been told to tighten it up i can replace the bushes on the gear shift linkages and jsut wondering how to do it and how much its going to cost? at the moment your lucky to find any gears.
check under the rear seat... under the oval plate...
to see if the linkage is worn/broken etc...
its not a costly project if You can do it yourself....
probably not too expensive having a VW shop do it..
the small cheap nylon bush inside the tunnel is just a fiddly job
so, its not going to cost You much money....
LEE
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---