Anyone fitted rear seatbelts in a T25 Trakka

NZVWNUT Learner Dubber

3 posts · joined Jan 2009 · 7 Feb 2011, 4:38 pm

#825244

Hi - has anyone had success with fitting 3 point seatbelts into a 1982 ish trakka? I have just bought one and am keen for ideas on the best way to fit these. Thanks

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 7 Feb 2011, 6:06 pm

#825261

use the origional mount points they will be ther u may have to poke around to find them

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

grumble Son of Jim - Creator of Good

2,672 posts · joined Jun 2008 · 7 Feb 2011, 7:33 pm

#825286

I have a rear seat and a set of inertia belts and associated mounting brackets if you are interested,these came out of a later model but I would assume that the points are the same.Cheers

Kombi Dad Slammed & Awesome Dubber

96 posts · joined Jun 2003 · 9 Feb 2011, 8:10 am

#825519

I have rear seat belts in my '82 camper. One is a lap sash. The other two are lap. The lap sash uses the original mounts as does the centre lap. Drivers side lap uses an original mount and a new mount as the cupboard is in the way to use the original lap sash mounts. I had to get an engineer's certificate when registering it in NSW (was originally registered in ACT) as the compliance plate said seating 2. It now legally can carry 5.