Skip to content
Aussieveedubbers

Building Engine for Torque

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 ·

#829067
DO NOT USE A STOCK CAM...........if you do, the engine will be a dog and run HOT. A stock cam is not designed to fuel a 1916cc motor.


matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#829070
Smiley wrote:So no one on here has ever bought quality engine parts before?
Yes Smiley, I've bought parts, I sell some too. Hard to recommend any particular one place as I shop around and get different parts from different suppliers. Give me a call for some more details.
Smiley wrote:I've decided to go with a 1916, stock bottom end, stock heads with a polish out, stock cam ( or should I use the W100?) twin Kadrons/webbers/somethings. Running full flow oiling with an external spin on filter and maybe an external cooler.
Smiley 😎
Stock bottom end is fine, but for dual carbs, I'd go with some better than stock heads with a cam to suit. The biggest hassle is the dual carbs need some careful attention regarding air filtration, with a baja, dual carb air cleaners are right in the firing line of large volumes of dirt and dust, so the std setup that's meant for a streeter wont cut it. Thats why many offroaders end up with a center mount single carb, more torque too, but with mild heads on a 1915, a single 44 IDF goes nicely, all beit, you will want more once you get used to a setup like that.
Definately go fullflow oil filter, a cooler can be added if needed.
It all comes down to budget.....and time.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

Gracey Wolfsburg Wizard

511 posts · joined Feb 2003 ·

#829071
I'd contact Stan Pobjoy for one of his 22/62 cams, he uses and recommends these for engines built with torque in mind.

Carter Seriously Crusin Dubber

104 posts · joined Oct 2008 ·

#829109
do a bit of research into dellorto's before you choose webers. There are many people who suggest that they are superior for what ever reasons.

fish26 Fahrvergnugen

903 posts · joined Jul 2007 ·

#829234
Dells have a better progression circuit, smoother transition. As for cam the 22/62 is a nice one for torque it has the same specs as Resolit AP 3 only with more lift, can be used with twin carbs and better than stock heads and either stock or ratio lifters.
Or you can convert a stock Type 4 for less than 3K 😉
bitten by the bug..........several times

Smiley Veteran Volks Folk

2,125 posts · joined Oct 2008 ·

#829241
fish26 wrote:Or you can convert a stock Type 4 for less than 3K 😉
I don't want an old engine though. So it would probably be considerably more then 3k after I rebuild the engine.



Smiley 😎
If you said I was a Volkswagen man, you'd be right.

fish26 Fahrvergnugen

903 posts · joined Jul 2007 ·

#829305
Plenty of good information given in this thread, go out and get it built whether T1 or T4, also please upgrade your brakes, tyres and suspension if you haven't already done so.

I have seen stock rebuilt T4 longblock on this site for 2K, but I am assuming you can do some of the work yourself hence the 3K conversion I had in mind.

I am also wondering how much an engine rebuild by a professional you think is worth or what your realistic budget is?
bitten by the bug..........several times

Bizarre Moderator The artist formerly known as blue74l

12,787 posts · joined Aug 2002 ·

#829306
I have a 22/62 cam in my 1916

And yes - it is a nice and torquey daily driver

Currently has dual Dells on it
Futue te ipsum!!!