clutch guide sleeve conversion

64 posts · joined Jan 2009 · 25 Feb 2011, 10:02 pm

#828260

Gday all. Has anyone out there used the sleeve conversion on the early type 3 box that inserts into front input shaft inplace of g/box seal to take the later clutch thrust bearing i have found 1 at machine7.com in UK but would like to get locally if possible thanks
Ernie

ernie norley Commited Dubber

64 posts · joined Jan 2009 · 1 Mar 2011, 8:32 am

#828853

Gday all sharpbuilt have the sleeve thanks
Ernie

dangerous 23 Windows of Awesome

5,901 posts · joined Jan 2005 · 1 Mar 2011, 10:14 pm

#828962

Let us know how well it fits.
A lot less work than drilling and tapping 7mm threads!

westi wrote:That's mad Alan.

ernie norley Commited Dubber

64 posts · joined Jan 2009 · 4 Mar 2011, 5:26 pm

#829317

Gday Dangerous I have A 180b motor with a modified beetle flywheel running a 228mm kombi clutch.In my baja. I ended up using an adaptor ring that clips onto p/plate to take up the gap. But will get 1 eventually for other box.