Posts: 469
Threads: 145
Registered: January 19th, 2004
Member Is Offline
Location: Bald Hills Qld
Theme: UltimaBB Pro Blue ( Default )
posted on January 30th, 2004 at 02:41 PM
prepation of fibreglass
just after some advice on what to prime fibreglass panels with before painting with acrillic paint.
Do you have to spray a fibreglass primer before applying the acrillic primer/undercoat
Also what is the best way to fill/fix the cracks you get in fibreglass guards, will applying a coat of resin fix the problem of them recracking in
time or is that only a temp fix
Any help would be muchly appreciated
Posts: 738
Threads: 33
Registered: July 9th, 2003
Member Is Offline
Location: SYDNEY
Theme: UltimaBB Pro Blue ( Default )
Mood: OUT OF CONTROL
posted on January 30th, 2004 at 05:22 PM
Repair all the cracks with 2 pack nikki or bogg, Key the whole surface with up to 36 grit sand paper preferably on a sanding machine of some type and
use a good high build primer surfacer, after that its buisness as usual with your top coat, whether you use single pack or 2 pack the basics are
similar
