| [ Total Views: 942 | Total Replies: 6 | Thread Id: 77331 ] |
|
|
 mengyou
A.k.a.: Mark
Commited Dubber
Posts: 63
Threads: 8
Registered: June 11th, 2009
Member Is Offline
Location: Mount Pritchard,NSW
Theme: UltimaBB Pro Purple
|
| posted on June 21st, 2009 at 06:12 PM |
|
|
Door hinge pin removal
I am looking at putting a hinge pin mirror on the 65 beetle.
What is the best way to remove the door pin?
I have heard it is a hard task. I have been told you have to heat the hinge, which would burn the paint ( still in primer so no probs).
The other was not to heat and use an impact tool or a punch. Do you do this with door on or off car, does not seem to be a lot of clearance between
hinge and door to swing hammer.
Suggestions?
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on June 21st, 2009 at 06:28 PM |
|
|
its best to remove the door from the car and get some mates to help you hold the door
the hinge has to be supported there is a tool that can also be used
if you carnt do yourself then take it to vintage to get the job done correctly you may need an over size pin and the hinge has to be reamed out
to size
|
|
|
eraser
Fahrvergnugen
Posts: 970
Threads: 128
Registered: March 11th, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Powder
|
| posted on June 21st, 2009 at 06:28 PM |
|
|
http://www.thesamba.com/vw/classifieds/detail.php?id=522556
is the best option.. but it is expensive.
|
|
|
mengyou
A.k.a.: Mark
Commited Dubber
Posts: 63
Threads: 8
Registered: June 11th, 2009
Member Is Offline
Location: Mount Pritchard,NSW
Theme: UltimaBB Pro Purple
|
| posted on June 21st, 2009 at 07:40 PM |
|
|
Thanks I think vintage could be the best option
|
|
|
mengyou
A.k.a.: Mark
Commited Dubber
Posts: 63
Threads: 8
Registered: June 11th, 2009
Member Is Offline
Location: Mount Pritchard,NSW
Theme: UltimaBB Pro Purple
|
| posted on June 22nd, 2009 at 12:14 PM |
|
|
I checked a few places to get it done.....surprised...... not cheap!
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on June 23rd, 2009 at 12:09 AM |
|
|
| Quote: | Originally
posted by mengyou
I am looking at putting a hinge pin mirror on the 65 beetle.
What is the best way to remove the door pin?
I have heard it is a hard task. I have been told you have to heat the hinge, which would burn the paint ( still in primer so no probs).
The other was not to heat and use an impact tool or a punch. Do you do this with door on or off car, does not seem to be a lot of clearance between
hinge and door to swing hammer.
Suggestions?
|
Yes, easy to damage door...
Best is a tool that was made for the job...
I've never actually seen one but there must be one somewhere????
other then that, take the door to get the pins pressed out with a press....
I'd like to replace My drivers door hinge pins too...
without taking any paint off...
I just thought why they have oversize pins....
its for the door part of the hing which wears.....
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Camo
A.k.a.: Kev
Custom Title Time!
Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline
Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue
|
| posted on June 23rd, 2009 at 09:02 AM |
|
|
Proposition : If I were to buy one of these tools, would people pay $25 or so to borrow it for the week-end. May also need a refundable deposit to
cover me in case it didn't return. I have already emailed the maker to obtain shipping quote.
Just a thought, Kevin
Please let me know your thoughts and pending on response, will depend if I buy one in.
EDIT - Have also put a post in the General Chit Chat section about this.
|
|
|
