| [ Total Views: 1351 | Total Replies: 18 | Thread Id: 112019 ] |
|
|
 ultrasuede
Commited Dubber
Posts: 62
Threads: 23
Registered: April 13th, 2015
Member Is Offline
Location: Goondiwindi QLD
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 10th, 2017 at 06:15 PM |
|
|
Bouncing gearbox
Hi all, after it's second trip to the mechanic due to their first screw up (Broke the gearbox nose the first time), my gearbox is jumping when I
accelerate, and hitting the body. I attached a video of the coupling showing the jump. Anyone know what it is? Easy fix or should I take it back
again?
https://youtu.be/-K0QsM8RvtU
Also, it only happens in forward gears, reverse gear is unaffected
1961 Bug owner
|
|
|
shokwave2
A.k.a.: Matt Hamilton
Officially Full-On Dubber
Posts: 289
Threads: 28
Registered: March 7th, 2010
Member Is Offline
Theme: UltimaBB Psyche Blue
|
| posted on January 10th, 2017 at 06:33 PM |
|
|
Maybe check the front trans mount. Bolts may be loose or missing. Might just need tightening. Or take it back and get them to fix their f-up.
|
|
|
ultrasuede
Commited Dubber
Posts: 62
Threads: 23
Registered: April 13th, 2015
Member Is Offline
Location: Goondiwindi QLD
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 10th, 2017 at 06:55 PM |
|
|
They seem fine, also it only happens in forward gears. Reverse is fine
1961 Bug owner
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on January 10th, 2017 at 07:16 PM |
|
|
New front mount required its GONE
where are u located u need a real VW guy to FIX
|
|
|
ultrasuede
Commited Dubber
Posts: 62
Threads: 23
Registered: April 13th, 2015
Member Is Offline
Location: Goondiwindi QLD
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 10th, 2017 at 07:37 PM |
|
|
Goondiwindi QLD mate. Not many to choose from haha
1961 Bug owner
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 11th, 2017 at 06:12 AM |
|
|
if it's a later style front mount - the new ones are rubbish
Fix it for good with a Berg style semi solid mount
Futue te ipsum!!!
|
|
|
ultrasuede
Commited Dubber
Posts: 62
Threads: 23
Registered: April 13th, 2015
Member Is Offline
Location: Goondiwindi QLD
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 14th, 2017 at 08:25 AM |
|
|
Finally had a chance to play with the bug. Here is a video of the front mount. The mount is 3 months old.
https://youtu.be/I7G58Qk6OYA
Any suggestions for a better mount will be muchly appreciated.
Cheers
1961 Bug owner
|
|
|
splitbus
Seriously Crusin Dubber
Posts: 162
Threads: 12
Registered: January 22nd, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 14th, 2017 at 02:46 PM |
|
|
Whats the other 2 mounts like
Cheers, Mike
------------------------------------
| o*/o | 55 split screen
I don't have a bucket list, I have a f^%k it list a mile long
|
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 14th, 2017 at 03:28 PM |
|
|
this will fix the front mount problem
As I said - the new mounts are shit
Futue te ipsum!!!
|
|
|
ultrasuede
Commited Dubber
Posts: 62
Threads: 23
Registered: April 13th, 2015
Member Is Offline
Location: Goondiwindi QLD
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 15th, 2017 at 09:26 AM |
|
|
It is defiantly the front mount. I just put the jack on the front of the gearbox, and the middle of the mount has broken off the rest of it.
That looks like a good fix Bizarre. Unfortunately I do not own a welder, and paying someone to do it out here would be robbery. Any reliable bolt on
versions?
1961 Bug owner
|
|
|
ultrasuede
Commited Dubber
Posts: 62
Threads: 23
Registered: April 13th, 2015
Member Is Offline
Location: Goondiwindi QLD
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 15th, 2017 at 09:35 AM |
|
|
I think I found a solution
http://vwparts.aircooled.net/Front-Transmission-Intermediate-Mount-All-Type-1...
and
http://vwparts.aircooled.net/Front-Rhino-Transmission-Mounts-EACH-CB6210-p/cb...
No weld sounds good to me. Thoughts?
1961 Bug owner
|
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 15th, 2017 at 02:18 PM |
|
|
that rhino sruff is good
I had the rhino rear gearbox coupling and it was brilliant.
Same thing with the aftermarket rear couplers - rubbish. The rubbers rotted out in weeks.
That said - the rhino basket needed a tickle with a welder to stop the "clamp" from spinning.
You could use an original cage?
Whatever - I digress
I wouldn't just trust the rhino mount
But I cant work out how the "bolt in" works
you can see on mine where the AC.net one would end.
I can only assume you drill through the horns?
Be aware you do get transmission "noise" transmitted into the car with this mod.
It feels "harsh" at first but you soon get use to it
Futue te ipsum!!!
|
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 15th, 2017 at 02:24 PM |
|
|
More info here on the Samba
http://www.thesamba.com/vw/forum/viewtopic.php?t=621027&postdays=0&po...
OK - here is another version
Bolts Securely To Trans And Butts Up Firmly To Frame Horns
note you need longer transmission bolts to make it work
http://www.mooreparts.com/super-transmission-mount-support/
Futue te ipsum!!!
|
|
|
splitbus
Seriously Crusin Dubber
Posts: 162
Threads: 12
Registered: January 22nd, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 15th, 2017 at 05:49 PM |
|
|
What is postage cost on nosecone mount
2nd link
Cheers, Mike
------------------------------------
| o*/o | 55 split screen
I don't have a bucket list, I have a f^%k it list a mile long
|
|
|
ultrasuede
Commited Dubber
Posts: 62
Threads: 23
Registered: April 13th, 2015
Member Is Offline
Location: Goondiwindi QLD
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 16th, 2017 at 10:14 AM |
|
|
Thanks guys, I ended up calling Micks Motors in brissie. He is sending me new mounts and a strap kit. I will post results when I install them.
1961 Bug owner
|
|
|
ultrasuede
Commited Dubber
Posts: 62
Threads: 23
Registered: April 13th, 2015
Member Is Offline
Location: Goondiwindi QLD
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 22nd, 2017 at 10:05 AM |
|
|
Well in 1 day with the help of 1 jack, 2 jack stands and a set of spanners and sockets that I bought from the reject shop, I dropped the engine,
replaced the tranny mounts, bogged up 2 holes on the tranny that were leaking (why they are there in the first place, I have no idea) Installed the
empi tranny straps, put the engine back, just in time for dinner. The thing shift and drives like a dream. No increased shake or engine noise because
the straps are rubberized. It even got rid of an erratic acceleration problem I was having (the jerk in the tranny was pulling the accelerator cable,
and going from zero to balls deep with no in between).
I have a question, the mount I removed has a rubber nub on the back, the replacement one didn't. It still fits. Is that a problem?
1961 Bug owner
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on January 22nd, 2017 at 06:40 PM |
|
|
he holes are to install the selector ball s and springs there is normally a plastic plug fitted to close the hole.
|
|
|
ultrasuede
Commited Dubber
Posts: 62
Threads: 23
Registered: April 13th, 2015
Member Is Offline
Location: Goondiwindi QLD
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 27th, 2017 at 08:08 AM |
|
|
Okay, i'm banging my head against a wall now. My gearbox is bouncing while taking off in 1st again. Everything was going great, then all of a sudden,
the car starts jumping again. I have replaced the mounts (front and back) installed a bracing strap (front and back) made sure the bowden tube is
adjusted. I am out of ideas. Any help will be appreciated.
1961 Bug owner
|
|
|
bevoracing
A.k.a.: Tony Beven
Officially Full-On Dubber
Posts: 326
Threads: 36
Registered: January 18th, 2009
Member Is Offline
Location: Mount Pleasant SA
Theme: UltimaBB Vintage
Mood: Leaning against the shed wall !.
|
| posted on January 27th, 2017 at 09:55 AM |
|
|
Can't seem to paste anything in here so I'll type it out, again.
One of the old rules is "Don't over-tighten the pressure plate bolts, or the clutch shudders". Pressure plate to flywheel bolts, M8x1.5, 18 foot
pounds.
Theory is if you over tighten them it distorts the pressure plate and it doesn't clamp to the flywheel properly. It's not very tight so always use a
tension wrench, and Loctite. Worth checking, you've tried everything else, except replacing the clutch & pressure plate.
Good luck
Tony
|
|
|
