| [ Total Views: 1465 | Total Replies: 4 | Thread Id: 72538 ] |
|
|
 satori
Wolfsburg Wizard
Posts: 497
Threads: 243
Registered: May 9th, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Grey
|
| posted on October 26th, 2008 at 05:40 PM |
|
|
installing Pop out back windows on type 3 square
installing Pop out back windows on type 3 square
Hey guys. Can anyone give me some guidence on how to install back pop-outs on my 72 type 3 square. I have removed the old glass and rubber. How do you
attach the hidges onto the body. Are you supposed to cut slots out for them to fit in or do you have to weld something up. Also Is there suppose to be
a rubber that fits in behind the window frame as when I sit the window in place there is a grap remaining.
thanks
[URL=http://s1226
|
|
|
VW-VARIANT-L
Seriously Crusin Dubber
Posts: 154
Threads: 1
Registered: July 29th, 2007
Member Is Offline
Location: Bendigo
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 26th, 2008 at 07:05 PM |
|
|
Hi, The front of the pop-out glass frame has two metal tags. This slots into holes in the B pillar, but they have a metal lip which sticks out to
anchor the frame and usually a donor section is welded in. The hinges screw into the C pillar which has a threaded mounting plate ( but you will need
to insert a plate etc). The body window frame has a sealing trim, similar to the inner door material ( a hard tectured plastic) which seals against
the outer rubber glass seal.
I would recommend you check-out someones pop-out window set-up to understand better before cutting, Cheers.
|
|
|
satori
Wolfsburg Wizard
Posts: 497
Threads: 243
Registered: May 9th, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Grey
|
| posted on October 26th, 2008 at 08:12 PM |
|
|
Thanks mate. Yeah Some visuals would be of great help.
[URL=http://s1226
|
|
|
1500S
Custom Title Time!
Posts: 1418
Threads: 73
Registered: March 28th, 2005
Member Is Offline
Location: Nth Richmond, N.S.W
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 27th, 2008 at 05:10 PM |
|
|
I think we've been here before! Have a look at the avw link below on the disussion. This one of course is for a Notch BUT the B pillar needs are
the same for a Square. You need a donor B pillar hinge tongue from a pre 72 Square or an up to 63 Notch.
DH
http://forums.aussieveedubbers.com/viewtopic.php?tid=60859#pid579020
|
|
|
satori
Wolfsburg Wizard
Posts: 497
Threads: 243
Registered: May 9th, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Grey
|
| posted on October 27th, 2008 at 06:17 PM |
|
|
Thanks mate. I tied searching but didnt find much. That link prettymuch explians it all.
[URL=http://s1226
|
|
|
