Subject: Size of split kombi front nuts to get drum off
Beerboy
Custom Title Time!
Posts: 1030
Threads: 147
Registered: July 17th, 2004
Member Is Offline
Location: Balmain Sydney
Theme: UltimaBB Pro Blue ( Default )
posted on May 7th, 2005 at 07:11 PM
Size of split kombi front nuts to get drum off
am I right in thinking that a split kombi wheel bearing / front hub nuts are 33mm. Need to get a spanner me thinks.
thanks
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71
t2
Custom Title Time!
stop taking life so serious
Posts: 1102
Threads: 206
Registered: March 11th, 2004
Member Is Offline
Location: penrith
Theme: UltimaBB Pro Blue ( Default )
Mood: tired
posted on May 7th, 2005 at 08:05 PM
they should not be to tight i think there is a lock nut with a tab washer , tap the tab out of the way with a hammer and screw driver then undo the
outer nut then the inner nut , its only holding a bearing together, or the tab is on the inside nut cant remember i wouldnt go buying a unusual size
spanner like that if this is all you need it for , it might be a evil word but i think a shifter would be fine
just my 2c could be wrong
cheers darren
gravity wont get you high
Beerboy
Custom Title Time!
Posts: 1030
Threads: 147
Registered: July 17th, 2004
Member Is Offline
Location: Balmain Sydney
Theme: UltimaBB Pro Blue ( Default )
posted on May 8th, 2005 at 12:28 PM
thanks mate
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71
