Subject: EJ22 Bay - Engine Brace/Mount Tech Drawing WTD
crewcabconnection
Custom Title Time!
Being Sid James
Posts: 1922
Threads: 293
Registered: April 22nd, 2003
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
Mood: Looking forward to week 10
posted on October 11th, 2006 at 09:33 PM
EJ22 Bay - Engine Brace/Mount Tech Drawing WTD
Anyone got a tech drawing for the engine brace needed to mount and EJ22 into a bay. Got a mate with a fabrication factory, so want to make some up,
one for me, some more for others...
thanks
Loves a lolcat
71EJVan
Officially Full-On Dubber
Posts: 352
Threads: 23
Registered: August 19th, 2005
Member Is Offline
Location: Central Coast NSW, Australia
Theme: UltimaBB Pro White
posted on October 12th, 2006 at 09:06 AM
Here is mine.
The link .. http://forums.aussieveedubbers.com/viewtopic.php?tid=46532
The finished product.
The section in the middle is for a type 1 style engine mount cradle that I made to support the 1600 002 bellhousing.
The two other braces bolt to the original rear cross member hangers.
There is also two angle brackets that bolt on to the standard subi mounts.
This cross member is for a standard depth sump (I'm not lowering the van) and will have the same clearance to the road.
Early bays and late bays have different dimensions between the chassis rails.
Here is the cross member plans that I submitted to engineer.
Regards
Brendan
[ Edited on 11-10-2006 by 71EJVan ]
A VW for everyone!!
1972 1302 German Look
1971 Bay Panel with Subaru EJ20T
1970 Type 3 squareback in progress
1971 Type 3 notchback in progress
