| [ Total Views: 1120 | Total Replies: 28 | Thread Id: 70353 ] |
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 10th, 2008 at 10:35 PM |
|
|
How hard is it to replace door window scrappers ?
It's all relative Craig.
How long is a piece of string? Thats what I want to know!
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
 Adsman
Officially Full-On Dubber
Posts: 393
Threads: 21
Registered: January 23rd, 2007
Member Is Offline
Location: Townsville
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 10th, 2008 at 10:45 PM |
|
|
simple answer Matberry
A piece of string is precisely twice half its length
What my garage isn't messy........Well chaos is a form of order isn't it?
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on July 10th, 2008 at 10:47 PM |
|
|
not really hard more fiddly. Then again it can be done. Allow an hour each side and you will be right
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 10th, 2008 at 10:49 PM |
|
|
| Quote: | Originally
posted by Buggy Brad
not really hard . Allow an hour each side and you will be right
|
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on July 10th, 2008 at 10:49 PM |
|
|
Easy, I will just buy new rubbers and scrappers, and allow 2 hours !
I now it only takes 15mins to remove.
Cheers Brad
Craig t
|
|
|
pod
A.k.a.: paul mrvw061
Compulsive Aussie Vee Dubber
i`ve got to finish this thing one day
Posts: 4980
Threads: 145
Registered: December 28th, 2003
Member Is Offline
Location: campbelltown,nsw
Theme: UltimaBB Pro Yellow
Mood: could be better
|
| posted on July 10th, 2008 at 10:50 PM |
|
|
| Quote: | Originally
posted by Buggy Brad
not really hard more fiddly. Then again it can be done. Allow an hour each side and you will be right
|
i`ll 2nd that 
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on July 10th, 2008 at 10:55 PM |
|
|
| Quote: | Originally
posted by matberry
| Quote: | Originally
posted by Buggy Brad
not really hard . Allow an hour each side and you will be right
|
|
Why is that funny ?
Get out screw driver, tape shaft so no damage to paint
Remove door trim
Remove two 10mm bolts that hold window channel
Drop window into door shell
Remove old inner scraper
Remove old outer scraper
Fit new outer scraper
Fit New inner scraper
dry lube scrapers
Lift up window
Re-install 10mm bolts
wind up window to test
re-fit door card
yeah it can be a PITA which is why you drop the glass. Depending on the model you may need to drop the 1/4 out but most of the time the beetles are
fine.
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 10th, 2008 at 10:57 PM |
|
|
Sorry Brad, now you put it like that, it doesn't sound funny, but very easy.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on July 10th, 2008 at 10:58 PM |
|
|
Its a 68 beetle Brad.
Do I need to remove the channels the window runs up on the door frame as well as the quarter frame one ?
From memory they have PITA clips that hold them in ?
Matberry, have you done it before ?
|
|
|
trickysimon
A.k.a.: Simon Azzopardi
Custom Title Time!
100km/h is only 9 seconds away
Posts: 1473
Threads: 43
Registered: December 15th, 2007
Member Is Offline
Location: Wagga Wagga
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 10th, 2008 at 10:59 PM |
|
|
After you've done yours I'll bring mine around
I bought all the scrapers and started putting them in one day.
Only managed to get inside drivers on because i got too frustrated and gave up.
Simon
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 10th, 2008 at 11:07 PM |
|
|
Craig, its many times. 10+ years at Volksrestore, I did one or two, although my brother managed the panel section more than me.
Proceedure is important, Brads list will certainly help.
The worst part is the crap quality of most replacement parts.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on July 10th, 2008 at 11:09 PM |
|
|
so you should know all the tips ?
what else would you add to brads list ?
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 10th, 2008 at 11:11 PM |
|
|
Mate that was nearly ten years ago and I'm just getting into the swing of things,+ bed time and takes way too long typing... You'll be ok, just be
very carefull with new paint...
Take your time, reverse the disassembly order exactly when going back together.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on July 10th, 2008 at 11:12 PM |
|
|
Ok I wasn't posting an exact how to do it and it is to damn cold for me to go outside to the shed and double check.
Yes you need to remove the bailey channel and they PITA clips are easy to remove as long as you remove them correctly and don't just rip them out.
The clips are suppose to come out with the bailey channel not stay in the car. They have a retaining tab on the back that you slide up to get it out
of the hole (about 5mm). You can pull the bailey out of they but they have teeth and often don't like to let go. To put them back in you clip them in
and then push the bailey channel into it
As for times, I will happily do a set fot two hours labour if anyone wants to bring their car over with the correct parts. I don;t see what the big
deal is, it isn't even a dirty job.
If you realy hate it then just build a buggy ...
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on July 10th, 2008 at 11:16 PM |
|
|
hehehehe........yeah thats why i'm restoring a country buggy !!!!
I know its not a big deal....................its just I'm deciding between masking up the existing trim/scrapper (perfect condition) or remove and
replace ! I really don't want to get half way through and get the SH#Ts !
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 10th, 2008 at 11:18 PM |
|
|
How flash a paint job are you aiming for?
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on July 10th, 2008 at 11:21 PM |
|
|
yep I'm hearing ya.................remove them 
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on July 11th, 2008 at 12:00 AM |
|
|
Hi Craig
I have the perfect tool for doing this job, its a thin flexible plastic wedge, u2 me your address and I post you one. I use them for breaking into
cars.
Steve
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on July 11th, 2008 at 08:33 AM |
|
|
| Quote: | Originally
posted by 1303Steve
Hi Craig
I have the perfect tool for doing this job, its a thin flexible plastic wedge, u2 me your address and I post you one. I use them for breaking into
cars.
Steve
|
Can I have one too .. I like tools
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on July 11th, 2008 at 09:00 AM |
|
|
| Quote: | Originally
posted by 1303Steve
Hi Craig
I have the perfect tool for doing this job, its a thin flexible plastic wedge, u2 me your address and I post you one. I use them for breaking into
cars.
Steve
|
Don't U2U him your address, because then he'll come around and steal your car using his thin flexible plastic wedge
|
|
|
ancientbugger
Custom Title Time!
Posts: 1986
Threads: 191
Registered: March 24th, 2004
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Yellow
|
| posted on July 11th, 2008 at 12:39 PM |
|
|
and if you're lucky he'll fix the window as well
|
|
|
vwsteve
A.k.a.: steve
Veteran Volks Folk
karmann crazy
Posts: 2087
Threads: 200
Registered: July 25th, 2006
Member Is Offline
Location: Redcliffe QLD
Theme: UltimaBB Pro Navy
Mood: Busy!
|
| posted on July 11th, 2008 at 01:07 PM |
|
|
.
Do i detect a little tension
1 1963 356b porsche coupe
2 1960 karmann ghia cab
1 1965 karmann ghia cab
1 1966 karmann cab
1 1961 split ute
1 1967 split p/van
1 1952 standard bug
1 1963 ragtop
1 1960 ragtop
2 1954 ovals
1 1956 oval baja project
1 1957 oval flying flea
|
|
|
Mick058
Custom Title Time!
Posts: 1580
Threads: 109
Registered: January 29th, 2008
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 11th, 2008 at 02:46 PM |
|
|
Craig, why don't you get one of the local Vee dub shops to do it?
Can't cost to much...
|
|
|
ancientbugger
Custom Title Time!
Posts: 1986
Threads: 191
Registered: March 24th, 2004
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Yellow
|
| posted on July 11th, 2008 at 04:56 PM |
|
|
On building my sons baja I was more concerned over doing the door windows than anything else on the car. Wiring can get a bit annoying sometimes but
taking it slowly and logically it didn't bother me, but the thought of those PITA clips and the "fragile" trim attached to the outer scraper and my
short temper I expected something not nice to happen as it was I had to take two goes to get the first side done (I was replacing all rubbers and
refitting all the glass) but it is fiddly to do and I wish I could have done it in an hour per side.
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on July 11th, 2008 at 06:09 PM |
|
|
| Quote: | Originally
posted by Mick058
Craig, why don't you get one of the local Vee dub shops to do it?
Can't cost to much...
|
As a guide, how much did you pay to get your car done ?
|
|
|
Mick058
Custom Title Time!
Posts: 1580
Threads: 109
Registered: January 29th, 2008
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 11th, 2008 at 08:43 PM |
|
|
as a guide, if every part of the car was an equivalent cost in relation to the 'size' of the job, i would of been better off buying a 2008 Ferrari.
In saying that, i hadn't the time to do the whole car myself, so i paid through the butt for the bits the shops did.
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 11th, 2008 at 08:55 PM |
|
|
Aw com'on Craig, it only takes a bit of time..... or money.... or get Brad to do it
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on July 11th, 2008 at 09:04 PM |
|
|
don't worry Matt, I'm doing it.......................private joke with mick !
|
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on July 12th, 2008 at 04:33 PM |
|
|
I will do it (parts supplied) for anyone's Beetle as a two hour paying job. I will charge $180 and do it for you.
|
|
|
