Posts: 381
Threads: 154
Registered: August 19th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on October 15th, 2009 at 04:42 PM
Cam Gear Fitment
Hi Guys
Just received a SCAT W100 cam and a new gear, went to fit the gear to the cam and have come to a sudden stop. I build engines for a race team and
have never ever seen this before. Normally when you fit a cam gear you have a dowel pin or a timing mark on the cam and the gear. The only mark
this setup has is the timing mark on the cam gear for alignment with the crank.
Whats the deal when fitting the gear to the cam.
Trev
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
posted on October 15th, 2009 at 05:17 PM
Hi
The dot on the gear lines up with the slot for the oil pump. Its the same as a stock cam if you have one handy.
Steve
clinker42
Officially Full-On Dubber
Posts: 381
Threads: 154
Registered: August 19th, 2008
Member Is Offline
