Board Logo
Go To Bottom

Printable Version  
[ Total Views: 660 | Total Replies: 1 | Thread Id: 79930 ]
Author: Subject:  air in fuel lines?
Memberbrisbanefastback
Casual Dubber
*


Avatar


Posts: 36
Threads: 21
Registered: July 19th, 2007
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Ecstatic

posted on October 29th, 2009 at 10:13 AM
air in fuel lines?


Hopefully this is a simple problem...

I've just completed my first engine transplant in a type 3 and I've started to venture out on the local streets.

It runs fine on the flat, but going up a slight hill with just a bit of load on the engine I get pretty bad judders and loss of power.

Is this a fuel problem - possibly air in the line/pump? If so will it just work itself out in time? Carbies are not fully adjusted yet, but I get the same problem with two different sets.
Memberbajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
********


Avatar


Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline

Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!

posted on October 29th, 2009 at 11:51 AM



How much fuel was left in your tank? usually up a hill its a 'running rich' issue with the carby flooding... & that would cause splutters for sure.Thats why alot say not to park a vw angled up a steep hill for a while. so i've heard....

This is stuff i have 'overheard' on the grape vine... don't quote me. i could be absolutely wrong.

But you say you tried two sets of carbies.. hmm...
Your putting your foot down obviously moreso on this hill?




(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. :tu:
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 1.4% - SQL: 98.6% ]