Fitting clutch cable

thepie Casual Dubber

40 posts · joined Aug 2011 · 28 Feb 2015, 9:12 am

#1009068

Hi all , just removed pedal cluster to paint floor pan and having a nightmare trying to get it back to together , is there a easy way to get to keep clutch cable on ? It keeps falling off , also should there be a wing nut on other end?
Cheers Dave

RestoKäfer Commited Dubber

63 posts · joined Mar 2012 · 28 Feb 2015, 10:04 am

#1009070

drill a little hole in the hook and use a split pin ,

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 · 28 Feb 2015, 10:07 am

#1009071

You keep the cable on the pedal hook by not allowing the pedal to fall rearward, keeping it upright or fwd only it will stay on the hook.
Yes, a wing nut is usually fitted, although factory fittment was a pair of jamb nuts, 14 and 11mm spanner hex

Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

Old Dubber Wolfsburg Wizard

605 posts · joined Aug 2002 · 28 Feb 2015, 7:43 pm

#1009099

My trick is to use a thick rubber band to keep the cable on the pedal hook. The pedal can flop around while you get the nuts/wingnut on down the back.

Grahame
visit my club site at www.vwdcqinc.org.au

RestoKäfer Commited Dubber

63 posts · joined Mar 2012 · 10 Mar 2015, 4:07 pm

#1009579

How did you go,