Skip to content
Aussieveedubbers

rechroming bumper bars

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

jakeandco1958 Commited Dubber

51 posts · joined Aug 2012 ·

#1023790
Any one know of a good rechromer in melbourne? need to get the front and rear bumpers rechormed on my 1971 beetle. How much will it cost me roughly? Bars are not dented and only minor surface rust.

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#1023791
This is properly the closest place to get them done

Mine cost $ 300 each a few years ago and make sure you have no dents as they so do repairs

Albury Electroplaters

214 Borella Rd, East Albury NSW 2640

alburyelectroplaters.com.au

(02) 6021 1205
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

psimitar Son of Jim - Creator of Good

2,506 posts · joined Jan 2009 ·

#1023835
I think Vlad said Albury were good too. Better than $800 per bumper you get quoted in Brisbane 🤪

Panel beat and file any dents so they either have nothing to repair whether they do repairs or not. The filling of imperfections is what increases the plating cost as copper plating is used as the filler and then is sanded back. This is repeated until the imperfection is gone.
madness is in the eye of the beholder 👍