Skip to content
Aussieveedubbers

Steves 1303 buildup, found lots of kilowatts

1 like
Share Share on Facebook Share on X Share on Reddit
Log in to reply

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 ·

#1037341
👍

Great stuff Steve
Futue te ipsum!!!

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1037381
A bit of a delay with the tuner, he's had a few headache cars to deal with and he asked me to delay bringing the car up.

this is what was done to the motor

Block has been doweled to prevent cylinder wall splitting
14 mm head studs fitted
Manley forged pistons
Argo I beam rods
Race bearings
New EJ257 crank
Full blue print of motor
Genuine 11 mm oil pump
New genuine water pump

Flintstones Custom Title Time!

1,077 posts · joined Aug 2002 ·

#1037402
Some serious gear there Steve, what rwkw are you aiming for this time?
Cheers
D

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1037405
The engine builder put a limit of 8000 rpm, 30 psi and 400 kW, it will be up to what the turbo can handle. you can really feel the difference the stroker crank makes, it should bring everything on sooner, turbo is GTX30/76 with a .63 rear housing and I don't want to do this again

1 attachment · Log in to view

Flintstones Custom Title Time!

1,077 posts · joined Aug 2002 ·

#1037420
Nice souvenir 😂👍

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1037500
Car is still at the tuner, the tuner has issues in the past getting the variable inlet cams to make any difference in the the way the car runs, Adaptronic have now supplied a new ECU which is their latest version in the Modular series

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1037567
I picked up some motor insurance today, an Accusump. I had one years ago but my son used it on his drift car so I had to buy another one.

They give you pre oiling before starting the motor and also make up for oil surge causing the motor to drop oil pressue

1 attachment · Log in to view

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1037596
vw54 wrote:Accumulator
yep

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1037861
Red blue green 3 boost settings
Pink is old setup

it made 305 kw on 29 psi, the smaller rear housing is hurting the top end but it also made 200kw at 4,500 which is really impressive, catching the train up tomorrow to pick it up

I also fitted an intercooler temp gauge, the intercooler is working fine

3 attachments · Log in to view

waltermitty Legend when my beer goggles are on

1,993 posts · joined Aug 2002 ·

#1037862
W
oW!
23 windows ...8 too many!

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1037863
thanks

Flintstones Custom Title Time!

1,077 posts · joined Aug 2002 ·

#1037885
Steve, even with that housing it's 305kw at 6100rpm!!
That would be soo streetable to drive.
Looks like you're going to have a grin from ear to ear when you pick it up 🙂

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1037886
Thanks Dino, its a blast to drive, I could chase more horsepower with a different rear housing or bigger turbo but I think what I have now is more usable

boof2332 Custom Title Time!

1,210 posts · joined May 2004 ·

#1037984
Thats some sweet power mate!!

I popped mine on the dyno the other day to play with the off boost/around town tune and turned my boost down to 14psi as I have had some traction issues in first and second and made 204kw atw.

Benefits of having a dirty big box in front of the engine for your power!!

Love your work..

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1037999
Thanks Boof I will have to take you for a spin in it, the noises coming out of the air intake are so good, I thought the air filter would dampen it out

boof2332 Custom Title Time!

1,210 posts · joined May 2004 ·

#1038034
Intake looks sweet!

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1038080
thanks

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1038545
Hi

I've been driving the car around and having fun. I need to do a little body work where it meets the pan, it didn't line up properly with the hoop over the transmission. As soon as I get that done I will start doing some speed events, carefully.

I got my Accusump hooked up, that was a lot harder than I expected, the line wanted to run into everything. I relocated the oil filter under rear mudguard and the Accusump is under the back seat.
Steve

2 attachments · Log in to view

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1038881
Hi

I was driving past a weighbridge yesterday so I thought I would pop in to get the car weighed, it came out at 1160 kg the same as when I weighed it ready to race at WISID, I emptied the boot but forgot the scissor jack and it still had almost a full tank, so about 20 odd kg there so I think it is lighter.

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1040563
Hi

Motor has been out of the car for a bit now, going back in this weekend.

I just put my entry in for the Gunnedah 1/2 mile race on Gunnedah Aerodrome in September, I hope I get a start.

I need to sort a few things like the launch control and get some Ks on the motor.

Steve

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 ·

#1040573
1303Steve wrote:I need to do a little body work where it meets the pan, it didn't line up properly with the hoop over the transmission.
Sounds great Steve

Did you get the body work sorted?

(Love this car! 😍🤪 )
Futue te ipsum!!!

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1040606
Entry is confirmed for Race Revolution at Gunnedah on the 1st of September, I need to get my finger out.

Glad you approve Barry, body work issues all fixed now

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1040959
Hi

Just got back from running at Gunnedah, I won my class and finished 37 out of 80 cars

ran at 231 kph

1 attachment · Log in to view

nbturbo Veteran Volks Folk

2,171 posts · joined Dec 2002 ·

#1040960
Kin awesome.

hulbyw Insano Dub Head

819 posts · joined Sep 2009 ·

#1040961
Cool. Very well done!
Cheers

Flintstones Custom Title Time!

1,077 posts · joined Aug 2002 ·

#1040962
👍👍

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1040965
Thanks guys, the runway at Gunnedah is very bumpy near the end, I think Im going to look at some front aero, it was getting a bit hairy at about the 700 metre mark and the car squatted the rear the whole length of the track

not sure if this video will play https://www.facebook.com/davejcarter/videos/10157671811864908/?t=0

I put a new radiator in the week before the event, it worked perfectly, I used one from a 944 Porsche, really nice fit, thanks to boys at Westside for helping out again with fan mounts.

with my intercooler temp gauge I was able to keep an eye intake temps, we used the ice box again, at the finish line intake temps were 90c after the turbo and 22c after the inter cooler, I was leaving the line with after coolers temps of around 18c

We setup the launch control and on the first run I fried the clutch, I nearly put it on the trailer but I let cool down and then I granny shifted it from then on

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#1041010
This is the Porsche 944 radiator that I used, I bought it on eBay $199 delivered, the brand is ASI, I have one in my 180, my son has one in his drift car and he also had turbo Ford Laser with one as well, no failures.

Westside welded on mounts for the fan and intercooler radiator

2 attachments · Log in to view