Hill climber rear hub advice please

andrewl Learner Dubber

16 posts · joined May 2006 · 21 Jul 2020, 5:37 pm

#1043507

Hi I am rebuilding an old open wheel hill climber and need a little help please.

The rear wheels are beetle hubs. I have attached pictures. The rear axle is fixed (no diff). My first question is whether there is a lighter weight option for the hub.

I already have 13 inch custom beetle rims so if there is an easy swap where I can use the same wheels that would be good. But it is not a major issue. My second question is the drive shaft from the sprocket to the hub is missing.

Do i simply buy a complete drive shaft with CV joints. The hub takes 6 bolts and the sprocket mounting plate also takes 6 bolts.

My third question is the distance between the hub and sprocket is 11.8 inches so the drive shaft would need to be cut and joined. I assume if done professionally that is not an issue.

Thanks for any advice regards Andrew

3 attachments · Log in to view

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 21 Jul 2020, 7:10 pm

#1043508

no pics

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

andrewl Learner Dubber

16 posts · joined May 2006 · 24 Jul 2020, 12:54 pm

#1043518

Now I have the images attached!

vwo60 Veteran Volks Folk

2,036 posts · joined Feb 2007 · 24 Jul 2020, 4:28 pm

#1043519

You could remove the brakes from there current location and mount small discs inboard and save 40 KG of unsprung weight, Image attached for standard length drive shaft, type one, shorter available from type 3 automatic. As for cutting the drive shaft, I would not do it but custom ones can be ordered from swayaway, I just bought a set for my subi gearbox conversion. https://swayaway.com/product-category/axles/axle-vw/axle-vw-irs/

1 attachment · Log in to view

andrewl Learner Dubber

16 posts · joined May 2006 · 24 Jul 2020, 7:34 pm

#1043521

Thanks for that advice on the drive shaft and the link it is much appreciated. The car does have in board discs the internals of the whole drum are removed. The only thing the drum does is mount the wheels. So is there a lighter weight option?

vwo60 Veteran Volks Folk

2,036 posts · joined Feb 2007 · 24 Jul 2020, 9:27 pm

#1043522

Try these guys as they have a billet rear hub and adapter. https://www.airkewld.com/Rear-Disc-Brake-Kits-s/2320.htm

Or a set of type 3 rear hubs with aluminium adapters .

HappyDaze Superannuated

2,887 posts · joined Jun 2009 · 25 Jul 2020, 1:13 pm

#1043523

Where are you situated, Andrew? I have built a few hillclimb cars over the years. There is quite a bit of stuff laying about it my shed that may be of use.

I'd rather wear a Beetle out by racing it than by polishing it!

andrewl Learner Dubber

16 posts · joined May 2006 · 25 Jul 2020, 5:26 pm

#1043524

Thanks vwo60 that looks like the way to. I appreciate the info.

andrewl Learner Dubber

16 posts · joined May 2006 · 26 Jul 2020, 8:51 am

#1043526

Hi HappyDaze,
I am in lucky lockdown Melbourne