quick shift set up.

whatnow Custom Title Time!

1,000 posts · joined Jan 2003 · 12 Nov 2003, 7:14 pm

#111094

i've been trying to set up the quick shift on my 67 and am not having much luck. ie it is bolted on but i can't get it to actually find more than 2 gears and even then it is hard to tell when this happens. i have tried moving the mount plate about but no luck. the rear coupling is good but the front shift rod mount has masses of vertical movement. also a basic Q, which way up does the bottom plate under the shifter go?
thanks.
henry.

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 · 13 Nov 2003, 1:14 pm

#111369

vw54 wrote:Now this only goes in ONE way but can be fitted several different ways. the tang must face up and forward.

Thanks Dave!

Futue te ipsum!!!

whatnow Custom Title Time!

1,000 posts · joined Jan 2003 · 13 Nov 2003, 9:43 pm

#111593

thanks for that.... ok i had that right. any suggestions what is going on?

Starbug rustbag

2,408 posts · joined Feb 2003 · 14 Nov 2003, 3:02 pm

#111771

i found that setting up the quick shift on my '68 was a right royal b**ch! just like yours, a few times we could only find 2 gears, other times you really had to be agressive to get into a gear... all i can remember was that my bf took it off and did it up reeeally tight one afternoon when it was annoying him and its worked beautifully ever since... so i guess the only advice ive got to give is to keep trying and do it up reeeeeally tight? sorry, not much help but much sympathy for how you feel!! 🙂🙂

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 · 14 Nov 2003, 4:01 pm

#111787

any movement of that plate and it wont work

Too late now but when i put them on i scribe the outline on the hump before i take the old original set up off.
When i put the kit on i just line it up correctly and it has always worked.

I would try taking the kit off and see if you can get it to work without shift kit.

The front bushing will vibrate but shouldnt effect gear selection.
Are you sure the rear is good??
Is it tight on the shaft???

Futue te ipsum!!!

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 14 Nov 2003, 5:46 pm

#111844

Loosen the shifter off and try selecting gears then If you get all 4 then put it into 2nd and nip up the bolts then see if you can get the other gears. If you can give the plate a final tighten.

Let the shifter centralise in 2nd gear.

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

wrecker67 Fahrvergnugen

997 posts · joined Aug 2002 · 14 Nov 2003, 7:50 pm

#111913

make sure you have the shift plate the right way up ,the long straight bit faces up on the drivers side,if that makes any sence...

breville Slammed & Awesome Dubber

80 posts · joined Jun 2003 · 15 Nov 2003, 6:48 am

#112083

The doco that comes with the Empi quick shifter says if you have problems - loosen the the bolts and adjust the position of the housing forward and to the rear - tighten then try. there is a little side ways movement there too if needed.

I didnt have selection problems with mine but I did have a significant rattle in 3rd and 4th till I played with the position.

regards

David

koolkarmakombi enkarmarising

2,078 posts · joined Jun 2003 · 15 Nov 2003, 7:02 am

#112086

Took me a few goes to get it right too. Helps to use a big screwdriver to pry the reverse lock out plate over towards the passenger side hard then tighten with enthusiasm, but not too much (snap)
kkk

70AutoStik Insano Dub Head

730 posts · joined Aug 2002 · 16 Nov 2003, 12:36 am

#112278

A few things that can throw the whole procedure off track are:

Shift rod bushing (had to throw the obvious in first.)

Shift coupler. If you order a replacement, either rubber (stock) or urethane, you'll probably just want to fit the inserts and keep the original cage, the new ones are rubbish.

Transmission mounts: You'd be surprised how many cars have trouble getting the shifter adjusted correctly with the tranny out of position due to 30+ year old mounts - not!

Hopefully you checked and changed all these before you fitted the quick-shift kit. If not, you might have to pull it off until you solve your original problem.

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 16 Nov 2003, 5:07 pm

#112462

Yes GOOD POINTS

Shift rod bushing, Shift coupler and Trnsmission mounts couldnt agree more.

Make sure all of these are working good first otherwise your wasting your time and effort

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

whatnow Custom Title Time!

1,000 posts · joined Jan 2003 · 17 Nov 2003, 8:47 pm

#113016

thanks for all the responses. being a 6V car i think the front mount was just steel on steel (yes it is badly worn... i was hoping to get away with it... i guess not). the shift coupling is quite good... certainly better than on one of my previous cars. gearbox mounts i hadn't checked as i was planning to fab up some solid mounts (the car is being set up as a motorkhana car and will not see any street use... ).
i guess fitting the quick shift will have to wait till they are done.

thanks again.

henry.