Points gap on 009 Distributor

72TWINCAB Fahrvergnugen

978 posts · joined Feb 2003 · 28 Dec 2003, 4:55 pm

#124035

I have a 2 litre Kombi with 009 distrubutor. I have just brought some points but am not sure on the gap I need to set it to.

Please help.

Andy Andy\'s Adventures

2,820 posts · joined Nov 2002 · 28 Dec 2003, 7:31 pm

#124083

Not sure if it's the same for a 009, but SVDA dizzy on 1600TP and all type 4 kombi's is 0.4mm
Also good to check dwell if possible (44-50deg).
Is the motor otherwise stock, and does the 009 run OK?? For an otherwise stock setup a stock Dizzy is best.
Andy
:thumb

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 28 Dec 2003, 7:37 pm

#124087

Set the gap to 0.016" on number one position same as a standard set up.

The timming may vary depending on whats been done to the engine etc etc

You may have to try a few positions to make sure it does not ping

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Robo Compulsive Aussie Vee Dubber

4,491 posts · joined Feb 2003 · 28 Dec 2003, 8:06 pm

#124108

On my stock 2ltr dizzy it's .016.
Rob....

Boxer Power
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft