How to remove doors 64\' t3

T3Forme Casual Dubber

30 posts · joined Dec 2002 · 14 Dec 2002, 5:33 pm

#14886

Im sure someone out there knows how to remove doors. I haven't touched them yet dont want to screw it up.
Any ideas?

Cheers
Liam:alien

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 17 Dec 2002, 8:49 am

#15306

Liam

I would start by spraying some penetrene on them, and allowing it to soak for a few days. From memory they are Number 4 cross recessed screws, or phillips head which ever u prefer.

If you can find a screwdriver with flats on the shaft, then you can add some extra leverage using a spanner on the flat section while your pushing the screwdriver.

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 17 Dec 2002, 12:00 pm

#15366

Another trick is to place a bit of valve course valve grinding paste on the tip of the screwdriver so it grips into the screw recess. this stops slipage

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409