i always found ardrox and crc 526 was good for a buzz at work. but thats just me im not happy unless im got grease up to my elbows
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
And the thread reaches an all new low.....
yes definately an all time low, sorry guys I crashed out had a big day and now I have a cold.
But I see you guys got along fine without me.
Frenzix man if you bored feel welcome to design me a new avatar I am open to suggestions????
Baby Loves to Mumbo
cool one mate whens that one getting added to the smilies
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
lol love the new look on the site frenzix lol cracked a smile.....PS: who likes my new avatar? i know the images are a bit dodge but its not too bad.
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
frenzix wrote:Sweet ok, you didn't like the ducky dubless one?
Gotta Love that one Ducky..................LOL
Hey frenzix that one looks cool,
This is one of the best smilies I've seen.....lol
hee hee
Love your work frenzix, sorry I hadn't seen the ducky dubless, but I like it
Baby Loves to Mumbo
pod filter flange goes on the baja tomorrow......from 50mm carbie throat to 90degree angled polished alloy opening to 76mm pod filter.:bounce
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
Inspired by frenzix's avatar I decided it was time I had an animated one too. You like?
yeah bami its cool
Baby Loves to Mumbo
Rubbed back the kombi today masking it ready for fresh coat of paint tomorrow. Tonight tracey and I have sewn up some new curtains and I've recovered the back cushion. Will do other 2 seats cushions tomorrow. Its coming along
Baby Loves to Mumbo
I liked the Type 3 shot. It was a thing of beauty. The new one's o.k., but I think you have more personality than that!
Well done , all three look the part.:thumb
Took some today just havent loaded them on yet. But we going great guns, a real team effort. A Mate is helping us with the paint job should be done by sunday sunset I hope. Cause it is my last day off before Valla
Baby Loves to Mumbo
yes we will be, yahoo
Baby Loves to Mumbo
before
Baby Loves to Mumbo
blu
Baby Loves to Mumbo
looks good ducky 🙂
Very nice.......
will you sell it when the buggy is done....lol
looks to good to sell now:P
Everything is for sale Moose
Baby Loves to Mumbo
LOL $2.63 homebrand u r a nut very funny and a grate drawer u should draw some more pics 4 us LOL :P🙂
hey 2 dollar.....did u have a bitch of a time getting the plug out of your gearbox to check the level? welded a 17mm bolt onto a socket to get the thing out but i cant budge it.....the 2 other guys who were with me (big guys) couldnt budge it! is there a trick?......all we ended up doing was the timing cause we couldnt do the gearbox oil and i cant seem to find these adjusting spurs to adjust my brakes🙁 even using the muirs book we know where they must be but u cant see them through the hole and cant get a screwdriver into where the should be!:vader ......they seem to sit a good inch and a half/ 2 inches below the hole. oh and the whole pod filter didnt work with the 3 incher cause there wasnt enough room under the kit for the length of pipe so we made a shorter flange and it has too much airflow and doesnt suck enough fuel so i have to get a smaller filter and make a better pipe fitting. untill then ive got the ol oil bath...........im having a rant cause i need to do this before valla. well the brakes and gearbox n e way. there we go im finished now.
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
Anthiron wrote:did u have a bitch of a time getting the plug out of your gearbox to check the level? welded a 17mm bolt onto a socket to get the thing out but i cant budge it.....the 2 other guys who were with me (big guys) couldnt budge it! is there a trick
Hey, give this a go.
I have a 17mm hexbar but you should be able to use your bolt. put pressure on the plug then "TAP" the end of the bolt with a hammer.
I had a day like that with bolts but mine wouldn't go back to where they came from, a five minute job turned into a 30 min epic
Baby Loves to Mumbo
Okay guys heres an update on our Big Blu
All bits back on after the respray
Goes in this week for new cv boots and service
Interior well on the way have recovered seats in rear and Trace is half way through curtain making, looking good and taking on character too
Baby Loves to Mumbo
thanks 2 dollar and freinds. ill remove the wheels on my day off and put a stocker on to adjust them that makes sense about the holes being covered.......ill have another go at the gearbox maybe next weekend ill see if i can put it on the hoist at Eirinns fathers mechi shop.
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
cant wait til valla to see the beast Anthiron
Baby Loves to Mumbo
ha ha im not sure u will be as impressed as u seem to think u will be its not actually that excellent......it has the potential though.....first thing when i get back from valla will be new A pillar bases.
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
All vw's are excellent mate, they don't need to be show quality. My new bus definately isn't
Baby Loves to Mumbo
