.. yeh... like everyone else - too much, but still not enough as she's not moving under her own steam yet - hopefully for DOTVW though! (fingers and toes crossed!)
when i hear the money that some people have spent on their bugs, my first reaction is to choke and scream 'holy crap, thats a lot of money'. however, considering the average cost of a new small car these days is around $15000 (quite conservative estimation i believe), if one was to spend that much on a beetle, imagine how good the car would be, heaps better than a stock model hyundai getz or barina or some shit like that. VWs are great investments ay?
I've probably spent about $7000 all up... still lots more that I'd like to do... but there's no rust..and she's good mechanically now...just cosmetic stuff left
not counting my time as I have done it all myself, I lost count at $12K, and I have a way to go yet.
Some might say its a lot but try getting stuff for splits!!!
Makes buying a finished one for $18K sound cheap.
$9k for the buggy and its still about $5k from being finished....................about $20k on the 76' hillclimb car...............................about $10k on the 68' street car.............................about $2k on the 69'..................about $6k on the 54.....................$4k on the 58'...........................and $$$$$$ all over the place for the several cars worth of parts stashed away!!!
Spent $6700 on a 66 splitty sight unseen - it was in WA, we are in Melbourne, with no reg and no roadworthy....got it here for $500, had to spend another grand getting all the rust cut out of it and fixed up....still not registered or roadworthy...still has to be fitted out inside as it's empty photos of the car as it is and all the rust that was in the floor on the link below....
So far I reckon about $2100 for the car, and maybe somewhere about $2000 for bits so far. Now its at BuggyBrads to get some metal work done, then to a panel beaters to be cleaned and painted (have no idea what all that will cost :O) And will pay someone to check over the pan when I rebuild the bottom half it it all (Brakes, engine, gearbox etc).
So I figure if I get out of al for under $10k I will be a happy penguin 🙂
No pics with me here, but if 57 panel gets his camera downloaded you can see the shell on the way to Buggybrads.
Ooops,
forgot to add, I spent some on a type 3 in melb that has now dissapeared from sight without me knowing where it is 🙁 or word from the guy I bought it from.
Over the last 12 years I've spent about $70- $90k and I havn't finished, the car was about 8 yrs was in getting it on the road and since then the last 4 yrs spent on about three engine setups along with rear disk brakes front end mods EFI and now its off the road again recieving another new engine set up again. And I've done alot of the work myself. I keep all the reciepts to torchure myself with.
Its a sickness I need help, now thats off my chest I can go back out into the garage and work on my bug.