yeah i had a ride in the turbo bug after... man i almost shat myself when we went full ball down the main st in mortlake! That thing is crazy fast!
Jon
XXX-1.8T wrote:My mate reckons that cos SAS had the dyno on Shootout mode it adds 10% to the dyno figure and they should of had it on normal mode
Can anyone shed some light on this?
Also my car weighs 1150kgs?
So how are ur calculations working and what are u calculating?
I reckon your mate is jealous.
Divide 1150 by your kw reading to give power to weight ratio. less kgs each kw has to push the better. like a desktop drag race.
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
so 1150kgs/120.7kw
= 9.5
is this any good
Also my mate which pointed this out had his mates dyno reading that has shootout mode and normal mode and shoot out mode gave a 10% higher reading
Whats the use of these 2 modes???
I don't think that it really matters Costa, as long as u use the same dyno on the same mode everytime, it's all relative.
Jak
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
yeah. what matters is we are running the exact same turbocharger and i got 90 hp less. I want my money back.
wasnt a good thing to go to. Now I just want to spend more money
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
Golde60 wrote:how come jakriz is making 90 and ct 76? can i get some more details on engine configs, carbs, cam etc? i thought the 1916 would be making more?
To be quite honest I was expecting CT's 1916cc to make more than mine despite my recent upgrades in the head/rocker department over Xmas. I've also been slower in lap times as well but we put that down to the 150kg weight difference in our cars & also the gearbox difference as well, mine having a L-bug box with the higher gearing than CT's superbug box.
I've since changed to a close ratio box to try & play catch up as well as the head work & berg rockers.
The specs are as follows
1880cc 73x90.5mm
Chevy rods
Engle K-8 cam
Berg 1.4 rockers
040 heads with 40x35 valves ported & polished with 3 angle valve job by Richard Holzl 8.5:1 compression
Berg dual springs
Berg pushrods
1.5 inch merged exhaust
dual 45mm dellortoes with update kit(horizontal discharge tubes)
Tall manifolds match ported to heads
CT's 1916cc 69x94
Counterweighted crank
Pobjoy 30/70 cam
Street Eliminators with 44x37 valves
44mm Webers
Berg 1.5/8 merged header
1.25 ratio rockers
9.5:1 compression
I'm sure that CT can give u more info & correct anything that i have given.
We were both quite surprised with his 76hp. I was quite sure that he would have more but by how much was another thing.
CT is going to play around with heads & maybe another cam & we'll go back to the same dyno to see what happens.
Jak
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
Jak so what happened to Dick.
Sorry Dave , but who the hell are u referring to?
Jak
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
Dick Hozell you remeber Dick from V Forcce.
Jak go gett he spoons for teh custard... DOD...
RICHARD Or DICK as he known to his friends... everyone calls him DICK. did he bring the car along???
In all the years that I have known Richard I have never heard anyone call him Dick.
Yes he did bring the car along but was too late as he had trouble with some oil scavenge pump or something like that (too technical for me) & so unfortunantly missed out.
Jak
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
What the hell happened to Peter?
have i missed something sad here?
the spider didnt get hit on the way home did it?
bad? :cry
Yeah - as for my hit that was sad.
For the record i was at dyno day and just had my turn. took the car out and parked it and walked over to look at the spider. Next thing i hear a clunk and thought " uh oh! some poor sucker has been hit" - turn around and this goose has backed into me! I couldnt really say anything cause there wasnt any damage i could see. He reckon he was looking at all the cars and.... I just asked him to leave ........quickly.
Now back to happy stuff.
For the record Blue has
1776 - 69 x 90.5
Counterweighted crank
AP2 cam (sort of Engle 110ish)
8.5ish:1 CR
Stock valved 040 heads that are real old
Heads have been 3 angled but no "real" porting. Richard Holzl had to hemi them a bit cause i only had 43cc when i got them and they had to be opened to 48cc
IDF 36 carbs 40idles/140 mains/180 airs
Aircooled.net offset manifolds that were match ported by previous owner
Room for improvement
rejet - i am running too rich (but i knew that 140's either that or 120's. I need some 130's)
Probabally some 1.4:1 ratio rockers if i can get em cheap enough
TO be honest if i have 60 at the wheels - then that is fine by me! It pulls great and i have driven a few air cooleds now. "If" i can do some tricks and get it to 70 i will have a goal. Hmmmm mayne i should have taken the belt off!
[Edited on 2-2-2003 by blue74l]
Futue te ipsum!!!
So who did the vids and pics
saw Che Castro do most of it but i could be mistaken😎
Jak,
Great day, we`ll have to all do it again sometime. Thanks, Keith.
1st Saturday in February each year,that gives you a target each year to aim for,an incentive to pull your finger out and get on with it,i know it worked for me,now all i need is a bucket load of cash!
😀
No worries Keith, thank u for making drive your car, now I know what real hp is all about. Richard said that he might know where his Berg 86mm crank is...............if not, I'll get u to get me one later on in the year.
1st of Febuary of each year sounds great. Ct & I are going back to the dyno when he changes his heads. We have until the 12th of April for our first supersprint wiht the Porsche club & ideally we wold like to have the same hp so that we are evenly matched on the track, it would be no fun if one of us could just drive away from the other.
I'm going to play with jetting & also put on my match ported manifold gaskets! I left them at Richards & had to use standard metal gaskets which were about 2.5mm smaller in diameter to my ports! So I may pick up some hp there as well
Jak
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
Please accept my appologies for not attending guys. Unfortunately, I really had to be somewhere that I just couldnt get out of.... Its excellent to see some of the figures though and all of you guys that DID go, now know where you stand in relation to the performance of your cars.
Condolences to you three(?) that experienced situations that were out of your control. 🙁🙁
I hope you all are back on the road veedubbing shortly...
Jak or CT
could you guys do a power to weight thing?
I would be interested to see how much lighter CT's oval is compared to Jak's 1302 compared to my ...... um ....... do they have Jenny Craig for L Bugs? :jesus
Futue te ipsum!!!
heh yeah i took some photos but i still have to finish the roll 🙂
hey baz at least u got struts and a windscreen that isnt so wall shaped ! :P
Jon
so who took the video???
worked out what shoot out mode was, its a constant dyno where all variables like ramp rate are equal so if i go and dyno my car somewhere else shoot out mode will be the same conditions as saturdays dyno😎
My superbug is 890kg & I think that CT's oval is 760kg.
Jak
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
Costa insisting that he clean his front bumper while his car does 18000rpm!!!!
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
.
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
.
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
.
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
.
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
Hey Jak,
Yeah my car is probably lighter now. The cookie cutters are much lighter than the steel wheels I used to have. I can't afford to put much petrol in the tank. I think I ground the lobes off the cam to save weight too (judging by the dyno results). I'm running a dry sump becasue I can't afford oil either. I've filled the tyres with helium. I've replaced the glass with a plastic emergency windscreen from a service station.
Nah that's all BS. It's probably heavier since it's been upholstered and sound deadened, but not by much though. We can weigh the cars next time we're at Eastern Creek. We should do a test and tune day one Friday.
We'll have to figure out the our power to weight ratios so we can get them close. We might as well race with each other, we'll see daylight before we see Steve Carter's turbo bug.
CYA, CT
:jesus:bounce:jesus
esratrams
.
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
.
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!
.
Congratulations to Ben Durie for breaking the hillclimb record at Ringwood in his stroker beetle!