Skip to content
Aussieveedubbers

Fitting a type 4 to an early kombi

0 likes
Share Share on Facebook Share on X Share on Reddit

242 Seriously Crusin Dubber

179 posts · joined Sep 2002 ·

#320922
Has anyone on here fit a type 4 engine to a split window kombi using the stock type 4 fan without converting it to an upright fan?

I have trial fitted a type 4 into my project (including mocking up a rear valance) and it seems as though it will fit with a little engine bay seal custom work.

Engine bay is already hacked about from a previous owner so i thought i may be able to fit my engine with factory fan and tin ware.

Anyone with experience or web links?

kombibob AKA: Volkswagen Type 2 Transporter Van Robert

1,698 posts · joined May 2004 ·

#320929
i put one in my early bay, it has the same pull out rear as a split so i think it should be much the same

1 attachment · Log in to view

1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout

Get down low and go,go,go

242 Seriously Crusin Dubber

179 posts · joined Sep 2002 ·

#320933
Are you running stock heater boxes on that?
My concern si where the exhaust looks like it will run.
Is the early bay any longer than the split in the engine bay?

kombibob AKA: Volkswagen Type 2 Transporter Van Robert

1,698 posts · joined May 2004 ·

#320936
yep stock heater boxes
not sure if bay is longer than split ,ill compare the two tomorrow and get back to you
1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout

Get down low and go,go,go

Andy Andy\'s Adventures

2,820 posts · joined Nov 2002 ·

#321087
There are other options. I had an early bay with a type 4 motor, the PO cut the panels from the engine bay of a later kombi and grafted then to the engine bay of his kombi, so the normal type 4 engine bay seal still worked as it does in a later kombi. (hope that makes sense)

Alternatively you can put an upright fan kit on the type 4 motor and avoid those hassles.

I don't know if a splitty engine bay is longer/shorter than an early bay kombi.
:blah

Menangler Custom Title Time!

1,991 posts · joined Aug 2002 ·

#321208
Engine bay in a Splitty is smaller than an early Bay,
I have seen a stock T4 in a splitty, but it is a tight fit, the fan is very close to the engine lid and the rear bumper needs to be trimmer so the exhaust fits also.
FAHRVERGNUGEN;
Description of a pleasurable sensation,
Experienced when a car and it's driver are in mutual harmony, A unique driving experience, Pleasure, Satisfaction,
A feeling experienced by Volkswagen Drivers.

david Custom Title Time!

1,013 posts · joined Nov 2002 ·

#321300
splitbusaustralia (rob) is doing an unbelievable resto on a twin cab(leo) at the moment you will find all the info on his rebuild in members rides that is one schmik ute and it has a type 4 donk