first pic.. here is an exhaust I went to throw on an engine, the other end is on ok, this is where this end lines up, i remember seing a post about this before, what do i need to get that fits?, can i use the same j pipes that are on there now?, if you have what i need, how much? 🙂
next, I need this plastic cover for the gen, any one got one?
[Edited on 19/3/2005 by warb]
it was something like 1300 and 1600 pipes are the same but 1200 pipes are shorter and u probobly have the wront set.
and u dont need the plastic cover neither of my slots have them and my genny is fine and sticks out the arse end of my baja in the rain,
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
the reason the muffler is not fitting on your engine is because you have purchased the wrong one . It looks like you are trying to fit a 1200 muffler to a 13-15-1600 engine . The 1200 engine is approximately 15mm narrower than the later engines . All you need to do is get the correct muffler and use the same j-pipes you already have . A new german muffler is around $150-00 . If you give me a call on 02 42725644 during work hours I might have a good second hand one and possibly the plastic cover for the generator too . Wayne .:blah:blah:blah
Team
FASTEST ET @ WARWICK 2010 & 2011
FASTEST SPEED @ WARWICK 2011
FASTEST ET & SPEED WSID 2012
PB - 6.33@113.07(1/8) & 9.88@135(1/4)
cheers wayne, call you monday..
george at classic vee dub has the german ones new on special this month for $120
is the motor a 1200as tht pic shows the muffler you have is too wide is that the case or is it not wide enough
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourmuff its too wide
you have a 1200 motor have an old 1200 muffler here of my beetle just the peashooters are rusty if you want it
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourhey warb did you get a muffler yet, can bring it to nats tomorrow if you want it
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFour
