Size of split kombi front nuts to get drum off

Beerboy Custom Title Time!

1,030 posts · joined Jul 2004 · 7 May 2005, 7:11 pm

#352085

am I right in thinking that a split kombi wheel bearing / front hub nuts are 33mm. Need to get a spanner me thinks.

thanks

WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71

t2 stop taking life so serious

1,102 posts · joined Mar 2004 · 7 May 2005, 8:05 pm

#352112

they should not be to tight i think there is a lock nut with a tab washer , tap the tab out of the way with a hammer and screw driver then undo the outer nut then the inner nut , its only holding a bearing together, or the tab is on the inside nut cant remember i wouldnt go buying a unusual size spanner like that if this is all you need it for , it might be a evil word but i think a shifter would be fine
just my 2c could be wrong
cheers darren

gravity wont get you high

Beerboy Custom Title Time!

1,030 posts · joined Jul 2004 · 8 May 2005, 12:28 pm

#352380

thanks mate

WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71