After nearly a year, I finally got my billy-cart finished today. It was built out of three or four different bikes. Haven't got a chance to test it properly yet, except on my short drive-way. The brakes don't work real well yet, but who needs brakes. :P
The idea is that if all goes well, a two stroke mower engine will go on the back wheel, mmmm, air-cooled, rear-engined hooliganizing!!!
The steering is set up with proper rose joints, seems to work ok too.
[ Edited on 26-10-2005 by pete wood ]
over-steer city, here we come ey?! But then, we drive VW's, we know how to handle that...
haha That looks like a barrel of fun mate - the forks would add some 'suspension' qualities through the flexing too!👍nn[ Edited on 25-9-05 by oval TOFU ]
...and Robert's ya father's brother...
you need a st christopfer on the handle bars...you nutter...
Loves a lolcat
that's amazing 🙄
Let me out, When I call my name
IGOR is ALIVE !!!! 😎
Check this out we had a billy cart weekend last summer... its now gunna be an annual thing.
http://www.manshed.info/movies1.htmFinally got to test the cart today. Brian and Joel came round. We found the biggest and least busy hill and took turns going down. The best thing was have the car to carry the cart back up the hill. The first pic is the hill from halfway down. Shows just how steep it was.
thats awesome 👍 👍
Founding member of the C'town Rat-Pack
top speed was 50km/h as measured in our support vehicle following me. We were all quite surprised just how stable it was. The last pic is of Joel being a hooligan.. and we wonder why he keeps braking things on his monsta truck. KEEP YA HAND ON THE FREAKIN WHEEL!!!!:o
The whole cart has cost me about $130 to build as most of the parts were odd bits of steel or left overs. Pretty good value I reckon. Brian reckons it definitely needs a motor now. 😉
[ Edited on 2-3-2006 by pete wood ]
mmm, 50km/h, no helmet and one hand on the wheel. :P
LMAO its good to see you put brakes on it 😁
Founding member of the C'town Rat-Pack
i recon you will want to add some rubber to the knacker bar😵 if you motorize it
Looks like fun but I can see bruised boys if you hit a gutter. That's making my eyes water!
hey pete
u didnt find the metal u made the tie rods out of being weak especially around the end's??? looks like a trick design doesnt look stable but u proved me wrong!! bring on the motor!!
i can see it now have fun!!
cheers
rhys
it aint just cool its aircool'd
Nah, it's quite stable. the only thing I'll probably do is move the front axle under the frame and put another two support struts on the gooseneck with the handle bars attached. Appart from that, it's all good. :thumb
check this out 5 speed.. 93.7 kms ...average cruising speed 75-85kms.
grouse fun .1 year to work and home just before this ban was put on.
even cops laughted at me cruising.nn[ Edited on 27-9-2005 by mr_hip ]
thats a different way of doing it i like it!!can u send me some more pics of how its mounted etc mr hip?
cheers
rhysnn[ Edited on 27-9-2005 by kombi_kid ]
it aint just cool its aircool'd
What ban has come in?
mr_hip wrote:check this out 5 speed.. 93.7 kms ...average cruising speed 75-85kms.
grouse fun .1 year to work and home just before this ban was put on.
even cops laughted at me cruising.nn[ Edited on 27-9-2005 by mr_hip ]
This disclaimer does not reflect the thoughts or opinions of either myself, my company, my friends, or my dog: don't quote me on that; don't quote me on anything; this disclaimer is subject to change without notice; text is slightly enlarged to show detail; resemblance to actual persons, living or dead, is unintentional and coincidental; dry clean only; do not bend, fold, or mutilate; anchovies or jalapenos added to this disclaimer upon request; your mileage may vary; no substitutions are allowed; for a limited time only while supplies last; offer void where prohibited; this disclaimer is provided "as is" without any warranties expressed or implied
that looks like a lot of fun. Much better that any cart I had.
:thumb👍
If you can't laugh at yourself you can't laugh at anyone else! Because life is to short not to LAUGH
Looked like you had a ball - memory of yo9nger days but then mine had no offset and ball bearing wheels which were great for drifting round corners or in a straight line just for the slide factor
Let me out, When I call my name
IGOR is ALIVE !!!! 😎
Well, this cart has been fun.
What will I build next? I have a type three 1600, 2swingaxle boxes and a whole load of big five stud wheels, might be time for a khanacross special or maybe a boxer powered rail. The question is who's gonna donate me a k/l front end and a steering column? 😁
You can garantee it'll be low budget again. Hopefully the steering will be a bit more techo. 🙄
the ban in vic on the motorized bikes,monkey bikes etc. allowed on the roads.
here is a few more pics. i will get some more on later.
this might give you an idea or so,hope sonn[ Edited on 28-9-2005 by mr_hip ]
not much crash protection! peeling skin if you come off :duh
that something i been thinking of doing for a while now. cut the s**t out of a shopping trolley, weld on a small rollcage, lock the back wheels straight, put steering on the fronts....
early 60s beetle for sale - ex bush basher - spares - $100 or offers
noticed the tuff truck shirt... have to hikack...
are any of you heading to willowglen toyota challenge this weekend?
My mate in flano is going.
here's another one.
the bike is soo well balanced.
only broke 1 chain going to the back wheel
my only up keep was the crank bearings.
about $3 .WOW
1 jerry can gave me 2 weeks to work and home,
so let me do my calculations 6x6x2= around 72 kms for 6 bucks
[ Edited on 29-9-2005 by mr_hip ]
[ Edited on 29-9-2005 by mr_hip ]
[ Edited on 29-9-2005 by mr_hip ]
is there a kit you can buy to make one of those mr_hip ?
Founding member of the C'town Rat-Pack
i sent all these pids yesterday and ,well,see...
i will do it again later
Oh there they aredays
And there is no kit.
i made it at work in about 3 days
it only went about 40-60kms,then i changed the air filter and the bike went off.
i'll show you another bike i made for a friend and he did nothing with it,being the second bike i made it was easy.
i hope this helps in any way.
i made the bike to go 110+
[ Edited on 30-9-2005 by mr_hip ]
[ Edited on 30-9-2005 by mr_hip ]
[ Edited on 30-9-2005 by mr_hip ]
[ Edited on 30-9-2005 by mr_hip ]
Got the two stroke on an tested today, pics to follow. 😉
there is no kit..it is rather easy..need welder and an oxy set
i can get hold of 50-110-120-125cc 4 stroke motors complete . from a bike shop if any body has the desire to get one for a project
i think they are reasonably priced.
i haven't asked for any prices as yet
