Before i go ahead and start respraying i want to see how something looks and figure that using white vinyl would be the way to go. I realise that there will be edges etc but at this stage i'm more interested in the whole look and if it's worth doing.
So my question is where can i buy suitable white vinyl from in Sydney , preferably in large lengths and width's ?????
Cheers Dan:thumb
"If i had to explain you wouldnt understand"
The Lower Class
yeah i just tryed a similar thing.First i went to the local$2 shop and bought some cheap contacty type book covering.Kinda worked but ripped easily and could only be applied once.(no repositioning)
So then i went to local sign shop and bought some strechy,thicker type vinyl stuff.
hope this helps.
scott
[ Edited on 23-10-2005 by lohoon ]
Try the local sign-writing shop, they may even give you some off-cuts for nothing....
If you want to reposition sticky vinyl, use a spray bottle with water and a little detergent in it to spray the area. Makes it easy to lift and shift to different spot before final positioning.
try contacting warb cause he works that kind of stuff at his job danny
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
Cool i'll try a few sign shops then! Cheers
Dan:thumb
"If i had to explain you wouldnt understand"
The Lower Class
You can also get "application tape" in about 1m wide rolls.... cheaper than the vinyl. check it out .... its like masking tape but 1m wide
Danny I've got a roll of white but only 300mm wide, if it's any use I'll drop some over.
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
yeah, let me know what your after, i have access to all sorts of offcuts/stuff ... application tape comes in 1220mm logs also.. same with vinyl.. im sure i can get you some for free...
Spot light. About $7/m
