Skip to content
Aussieveedubbers

WTD.(Bris) IRS arms & Axles

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

SirDelton Seriously Crusin Dubber

124 posts · joined Jun 2006 ·

#537624
Hi Guy/Girls..

The Kitcar I'm doing up based on a T3 isn't an IRS, so I'm looking at buying the brackets from Classic to weld onto my rear end..

So I require the bottom arms & a set of axles to suit..

Plus anything else that maybe required to do this mod.
Rear end will be running Disc Brakes when completed.

Cheers
Darren..

vw2b Casual Dubber

43 posts · joined Aug 2005 ·

#537718
What are brackets from classic ?

VWCOOL 23 Windows of Awesome

5,158 posts · joined Jun 2003 ·

#537734
The inner pivot points required for the 'IRS' suspension arms. You can buy them and weld them to a non-IRS chassis
Pay your debts, CxxT

SirDelton Seriously Crusin Dubber

124 posts · joined Jun 2006 ·

#537851
VWCOOL wrote:The inner pivot points required for the 'IRS' suspension arms. You can buy them and weld them to a non-IRS chassis
Correct..


Well I believe that is the case.

Somebody must have a set somewhere?
I know some of you guys have used a Porsche 944 to do this.

Cheers
SD

rocknrob Insano Dub Head

844 posts · joined Dec 2003 ·

#537931
Was reading a thread on this very thing and apparently COR makes them

SirDelton Seriously Crusin Dubber

124 posts · joined Jun 2006 ·

#537963
rocknrob wrote:Was reading a thread on this very thing and apparently COR makes them
I was hopping to do this on the cheap..
This project is going to cost me more & more everytime I turn around.. :cry The STD arms fully welded should be WAY better then what I have..

dangerous 23 Windows of Awesome

5,901 posts · joined Jan 2005 ·

#538100
If you can find a whole type 3 rear end, they are a bolt in...no welding.
Type 1 will need to be welded.
westi wrote:That's mad Alan.

SirDelton Seriously Crusin Dubber

124 posts · joined Jun 2006 ·

#538409
dangerous wrote:If you can find a whole type 3 rear end, they are a bolt in...no welding.
Type 1 will need to be welded.
If anybody has a complete T3 IRS rear end please U2U me.

I'm still looking..

Thanks

Midlife crisis Nartispuddlejumper, Bureau of Toxicity

2,282 posts · joined May 2003 ·

#538429
I have sent you a U2u about a complete IRS rear.

Marc
If you can't laugh at yourself you can't laugh at anyone else! Because life is to short not to LAUGH

SirDelton Seriously Crusin Dubber

124 posts · joined Jun 2006 ·

#538506
MikeM wrote:What sort of kit car you building?

[ Edited on 26 September 2006 by MikeM ]
this is the one & only car built by Swanston & Pariss Industries at Carina QLD around 1985.
It is called a Paragon SP1.

1 attachment · Log in to view