Thought I would put the feelers out for the above, strong turn key or longblock.
In Sydney area, 70, upright, kombi
Thanks
kombiute Casual Dubber
30 posts · joined Oct 2006 ·
WTB kombi motor 1776-1835
Bizarre Moderator The artist formerly known as blue74l
12,789 posts · joined Aug 2002 ·
Wont bog down in detail - but an 1835 is thin walled 92mm cylinders. Not good.
These are 90.5's
You wont buy better
http://forums.aussieveedubbers.com/viewtopic.php?tid=62218&page=1#pid588674
Reckon he will move a tad as well
Will convert to upright.
These are 90.5's
You wont buy better
http://forums.aussieveedubbers.com/viewtopic.php?tid=62218&page=1#pid588674
Reckon he will move a tad as well
Will convert to upright.
Futue te ipsum!!!
Bizarre Moderator The artist formerly known as blue74l
12,789 posts · joined Aug 2002 ·
http://forums.aussieveedubbers.com/viewtopic.php?tid=63596
Here is another
I will add both of these motors suit your application. As in you need a 1600 T2/T3 case that has the rear supports.
You need to add a special brace if your use a standard beetle motor.
The first motos is complete.
The 2nd needs a few things (carb etc)
Ring Rod. Dont just reply to the post. He is in Woolongong by the way
Here is another
I will add both of these motors suit your application. As in you need a 1600 T2/T3 case that has the rear supports.
You need to add a special brace if your use a standard beetle motor.
The first motos is complete.
The 2nd needs a few things (carb etc)
Ring Rod. Dont just reply to the post. He is in Woolongong by the way
Futue te ipsum!!!