Line Boring

lugnuts Custom Title Time!

1,070 posts · joined Aug 2002 · 26 Jun 2003, 2:53 am

#60567

Hiya,anybody know how many times you can linebore a T1 case and the last size especially,i just measured mine at 66.5mm,oh and only tell me if its good news😀

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 26 Jun 2003, 8:28 am

#60585

I "thought" they were suppose to stamp what size they bore to on the inside??

I have heard of people boring to 60 thou (1 1/2mm :o ) but if it is for a hottie i wouldnt go past 10 thou.

No expert but i would be more worried about the thrust cut on the face. I think there is more hammering there from the back and forth rather than the flexing/harmonic of the crank

Futue te ipsum!!!

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 26 Jun 2003, 8:53 am

#60586

there are only 4 oversize back bearings available

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 26 Jun 2003, 9:28 am

#60595

true - 10,20,30 and 40 thou.

I have "heard" a few of the GEX's and the like use to 60 thou - dont know where they get bearings from

Futue te ipsum!!!

lugnuts Custom Title Time!

1,070 posts · joined Aug 2002 · 26 Jun 2003, 4:13 pm

#60720

Thanks guys yeah the bearing had something written on it ile see if i can decipher it:thumb

lugnuts Custom Title Time!

1,070 posts · joined Aug 2002 · 27 Jun 2003, 5:01 pm

#61074

Ok,this is on one of the bearings 2931 AIO72+1,50-STD on the outside and Fm L on the inside,this bearing is the big one on the end.This one is the little one on the other end of crank 2933 AT+1,50-STD BRAZIL.So sounds like this case is know a large doorstop,might get it ceramic coated as an experiment😀.

lugnuts Custom Title Time!

1,070 posts · joined Aug 2002 · 27 Jun 2003, 5:15 pm

#61078

[Edited on 27-6-2003 by lugnuts]

Che Castro ankle straps

1,945 posts · joined Aug 2002 · 28 Jun 2003, 1:33 pm

#61222

if ur going for a hottie just get a good std/std used one, or a new case. its better in the long run i reckon

Jon