Skip to content
Aussieveedubbers

headlight glass interchangebility

0 likes
Share Share on Facebook Share on X Share on Reddit

kombikim disfunctionally capable

1,521 posts · joined Dec 2002 ·

#613648
there are of course a number of different Bosch & hella headlight designs pre 1968 but is the glass interchangable between all of them ? it looks the same size but.........
specifically I am looking at putting oval glass in mid sixties lights

thanks
Please, I need drivers side window regulator (winder mechanism) for my '54

VWCOOL 23 Windows of Awesome

5,158 posts · joined Jun 2003 ·

#613656
yeah all good, easy to play swapsies but there are some differences that you may need to consider, such as some internal 'buckets' are plastic rather than steel; some adjusting screws have (+) heads rather than (-) etc
Pay your debts, CxxT

kombikim disfunctionally capable

1,521 posts · joined Dec 2002 ·

#613657
that should be OK, I just want to swap the actual glass

thanks
Please, I need drivers side window regulator (winder mechanism) for my '54

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#613659
yeah there all the same

Fit a new rubber seal to the glass to stop them rattleing around and use some safety glasses when removing and replacing the spring clips that hold the glass into the rim

The clips are prone to flying and going through someones eye
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

kombikim disfunctionally capable

1,521 posts · joined Dec 2002 ·

#613660
yeah, the clips are fun, luckily I have a few spares, after a nasty coupla hours the first time searching for them in grass with a magnet I ended up tieing a length of cotton to them
Please, I need drivers side window regulator (winder mechanism) for my '54

VWCOOL 23 Windows of Awesome

5,158 posts · joined Jun 2003 ·

#613676
vw54 wrote:yeah there all the same

Fit a new rubber seal to the glass to stop them rattleing around and use some safety glasses when removing and replacing the spring clips that hold the glass into the rim

The clips are prone to flying and going through someones eye
Yeah good info about the rubber seal; people usually donlt know they even exist! I've used electric tape around the edge of the glass (three or four laps of the glass) which although not as good as the proper rubber seal is better than nothing
Pay your debts, CxxT

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#613690
the Main difference between the lenses is the flutes
in the glass...

Beetle lenses throw the light to the left on Low beam

Kombi lenses do the same...
but naturally differently...

tape around the lenses is a good idea...

so long as the headlamp lenses are the same....

nothing worse than using old & late model lenses
or a Kombi and beetle lense on the one vehicle...
Yikes

cheers

Lee
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

kombikim disfunctionally capable

1,521 posts · joined Dec 2002 ·

#613691
no, glass in oval beetles does not throw beam to left, the asymmetrical lenses did not come out until about 1960 or so (I havent got time to search exact date) all I am doing is putting my symmetrical lenses in a pair of mid sixties lights I picked up that have perfect reflectors
Please, I need drivers side window regulator (winder mechanism) for my '54

Rota_Motor

Former member ·

#613724
can I ask a real silly question, its still headlight related.

are all the type 1, 2 and 3 headlights the same for the same year, or close enough for a swap over??

reason being, I saw some H4 lights on Ebay, said they were for beetle or kombi but there are two type 3s here now, and also we have a bunch of good beetle lights spare.. and a couple of average looking type 3 lights lol.

57oval Officially Full-On Dubber

305 posts · joined Oct 2006 ·

#613725
Kim, why dont you get the reflectors re-silvered to keep the original look for the oval.

kombikim disfunctionally capable

1,521 posts · joined Dec 2002 ·

#613754
yes, well there is a place of Epping Road at lane cove that does them at a good price but my car does not go off the road for more than a day & i get withdrawal symptoms, done 260km in it today.... & they are only open weekdays so I cant get there, a really good mid 60's set came up at a good price, so I will swap the glass,then only experts will pick it, & I dont care about that & I will get the originals resilvered when I get holidays
Please, I need drivers side window regulator (winder mechanism) for my '54

57oval Officially Full-On Dubber

305 posts · joined Oct 2006 ·

#613775
Thats the same place i have had mine done $ 60 pr.