Evening. Has anyone installed a compufire ignition module in a late model type 3? I've got a '73 wagon and have bought a module but it don't fit. My dizzy has a post which needs to be removed and the module has lug on the bottom which is suppose to line up with the hole, but it don't.
Oh well, back to points I 'spose.
Neil
71 super in progress.
Fraid so Neil
Or change dissy to one which uses GB534 points.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
It's funny. You ask the seller if it will fit. "umm yeah". Back to Sydney for refund.
I'll check around and see if I can get an equivalent dizzy.
Thanks.
71 super in progress.
Hi
You need a German made dizzy. I'm pretty sure the one you have would be a local Bosch one.
Steve
How can I find out? Some numbers that I can see are;
9 230 061 400
312 905 205 Z
71 super in progress.
Hi
It will have made in ?? written on it. But 312 905 205Z is a locally made dizzy. I'm not sure but maybe you could pull the post out of your base plate?
Steve
Made in Aus. I should be able to pull the post and redrill for the lug. But! I might put up with the points for a while.
Would the plate swap with a german dizzy? Or could I swap the lot?
Thanks
Neil
71 super in progress.
Mine (late type 3) was a bolt in job.. I guess i have a german distributor?
Thanks jo_tas.
Neil
71 super in progress.
I've probably got some dizzy's you could use . I've got a 009 that caught fire due to busted fuel hose which has burnt condensor and cap which you could use, should be home all weekend playing with cars . 0428 427 986
Thanks Klaus,
I'll give you a call, soon.
Neil
71 super in progress.
