Hi,
Looking for both the VW and the Bosch part numbers for the T3 2.1 watercooled engine's distributor.
i *think* it's from '86 to '92 year model??
TIA, Toby
type3lover in the garage...
796 posts · joined Feb 2005 ·
.
2.1 wasser part # for dizzy?
mackaymanx Custom Title Time!
1,611 posts · joined Jan 2006 ·
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]
type3lover in the garage...
796 posts · joined Feb 2005 ·
Thanks mate!!
We should chat about megasquirting type 3's sometime...seen ya on STF too.
We should chat about megasquirting type 3's sometime...seen ya on STF too.
.
mackaymanx Custom Title Time!
1,611 posts · joined Jan 2006 ·
I've been doing a little playing but definately a future project, still doing a lot of learning. But basically a modified standard type 3 FI system.
ps do you still have that exhaust clamp
ps do you still have that exhaust clamp
2 attachments · Log in to view
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]
type3lover in the garage...
796 posts · joined Feb 2005 ·
Looks like you are using later bosch injectors with the old pintle caps from the originals? I love the injector "cradles". Did you make them?
I think I'll also use the original intake runners for now too and a set of 4 cyl magna injectors fed from CB fuel rails...pic of where i am at:
Anyway gotta get this dizzy soon or I'll be forced to run std ignition and just let MS2 control fuel...aiming for a start next week if all goes well.
Even then it's a temporary solution...36-1 DIS controlled by MS2 and a coil on plug jobbie would be sweet don't u reckon? Still thinking of adding the trigger wheel on to the cooling fan....there must be a way!
PS The part #'s for the dizzy would be American wouldn't they? Same parts as here?
I think I'll also use the original intake runners for now too and a set of 4 cyl magna injectors fed from CB fuel rails...pic of where i am at:
Anyway gotta get this dizzy soon or I'll be forced to run std ignition and just let MS2 control fuel...aiming for a start next week if all goes well.
Even then it's a temporary solution...36-1 DIS controlled by MS2 and a coil on plug jobbie would be sweet don't u reckon? Still thinking of adding the trigger wheel on to the cooling fan....there must be a way!
PS The part #'s for the dizzy would be American wouldn't they? Same parts as here?
.
mackaymanx Custom Title Time!
1,611 posts · joined Jan 2006 ·
Yes the injectors are modified Ford EB with the VW pintle covers so the fit and seal in the manifold. 185cc which is a little large but they are the same capacity as the late FI and Mexi beetle injectors. I did make the injector cradles as the EB injector are about 4mm shorter making the vw ones unusable. The cradle is a bit thin at 6 mm but it was only a trial with what I had on hand, 10-12 mm should do it next time.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]