Hi all,
Only new to VW and this site and thought I would put up a couple of photos of my 1961 Beetle project so far. Just been stripping her down, cleaning and collecting parts (have heap more new parts then in photos). This is my mate sitting in the car down at Albury, where I picked it up from.
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.nice man. keep the pics coming as you progress!@
nick
Nothing great, but here she is ready for the trip to the sand blasters tomorrow (not using sand). Only a little bit of overhang at the rear of the ute 😏
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.Wasn't happy with the floor pan preparation and have rubbed it back and primed again, awaiting more rubbing 🙁 Also a photo of my chromed pedals I just got back.
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.was that the car on ebay?
watever
Dont think so. I bought it last year (November) from down near Victoria. It was advertised on carsales.com at the that time.
Kev
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.The finished painted floor pan, painted it today.
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.Just a couple of photos to show what stage I'm up to with the floor pan. Also, I got the body back today from the sand blasters and have a little bit of work ahead of me.
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.Q) What do you get when you spend stacks of money and get your car sand blasted.
A) A realisation that you will now be spending even more money on your car.
As per usual, old paint, bog etc covers up heaps and I now have another big task ahead of me. When I first saw the rust I thought sh#t, but now I have had time to think I am not overwhelmed as I first was and am not overly worried.
This is my first resto as asked by MC Griffin Bug and I am trying my best and learning more as I go. Well, now I will be learning more about rust repairs and plan on this car being full steel when I'm finished.
As I said in my last thread the car resto will slow down a bit now, but not my work load, only the finishing time. This is not due to loss of interest, but all the extra work I will be now doing. But I think if you are going to do something, do it right the first time (if you can afford it 😀 )
Now for the photos and there is more rust than what I have just shown here :cry:
.
.
.
.
.
.
.
.
.
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.The rust doesn't look too bad form the photos. I guess it depends on what you find when you start repairing it. This car is coming along very quickly. I love that floorpan. Gives me some ideas for my next project.
Spare the Duct tape, spoil the job - Red Green
Looking great - pan is looking sweet and if that is the worst of the rust you've pictured, then happy days! (trust me)
Al 😵💫
has that just been blasted? or has it a grey etch primer on it already?!
nick
Bare metal there.
ACCEPT THAT SOME DAYS YOU ARE THE PIDGEON AND SOME DAYS YOU ARE THE STATUE
Alder Outlaws VW Racing - check it out on fb!!
Looks like the blasters in Sydney are dam site faster than a certan Brisbane mob hey Mr Bond.
Your work is looking great to date keep it up and you'll end up with a very nice ride , I hope you have got some primer on that body by now or the humidity alone will soon have it looking like a VERY rusty mess.
Andrew
Don't let body work get in the way of real suspension travel
Thanks all for the input, and I have seen a video of a lot worse repaired so I dont feel to bad. As said, there is other rust but not really any worse than what I have shown. The blaster did spray with etch primer, sorry LIFE IN THE LOW LANE. Have been thinking about putting in 2 new heater channels and am confident with doing the job, my only concern is door alignment as I have body off floor and I think its easier to stuff this area up.
Cheers, Kevin
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.nice man
Doing a heater channel replacement is far easier now than later let me tell you.
A few pointers for the job would be as follows.
1. Take plenty of acurate measurements and double check everything
2. Ensure body is sitting level and square
3. Weld in tempary braces to hold the base of the b pillars in place so as they cannot flex sideways in the absence of the heater channell.
4. Only cut out the second side when the first side is completely finished
5. Make a tringular jig up that bolts to both hinge mounting point and also bolts to the striker area ensuring that it is a neat tight fit and this should eliminate any door fitting problems.
Now just have fun and post us plenty of pics.
Andrew
Don't let body work get in the way of real suspension travel
be thankfull ur not in the UK
ur bug would be classed as rust free over there
nearly every bug over theres routine maintaince involves replacing the entire bottom 6" of the car
so many ppl i know there from VZi do entire quarter panel replacements
Holly sh#t, my car is in great shape compared to those last ones. That makes me feel better, thanks.
And 'OZ Towdster', thanks for the tips.
Kevin
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.Small update. Now have the 2" narrowed beam on. Cut down my own springs and redrilled them and you can get away with adjusting your own tie rods right down, not needing to buy new ones. Also you will see my new rear brake rotor and caliper (only one fitted so far).
Kev
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.Another day and a little more work. Sorted out the brakes and now have them fitted for the last time (I hope). Had to do modifications to front and rear brake kits to get them all to line up etc.
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.Hi all,
Got the car in getting rust repairs done and thought I would show you a quick photo of the work and will update as they come. In the repaired photo, still needs cleaning up, but you get the idea.
To this
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.Very nice, love the pan, so shiny
'59 or Kombi?....feeling confused
'59 bug
'68 bug
'82 import T3 BUS. aircooled
Just a few more photos of the rust and panel repairs. The more I see it the more I think of how the budget has been blown right out. If anyone is thinking about doing a resto rather than just buying something already done, take my advice just buy something already done.
Again, these repairs obviously still need to be finished off properly.
Cheers, Kevin
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.Well, things have been a bit slow the last couple of months and not much happened. Took 2 weeks leave from work to get some done and my 4 year old ended up with tonsillitis, so I looked after her the first week. Then at the start of the 2nd week I stuffed my back and have a bulging disk. Ended up taking another 2 weeks off work sick leave and no work done. Put doors in to get over sized pins fitted, was told a week and it has now been 3 weeks. Not happy with their service.
Anyway, just a photo to show you were I'm up to and what arrived today. I'm excited (as big Kev would say) with the arrival so thought I would add to my post. Hopefully over the next couple of months there will be some big changes.
Kevin
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!
Click here for my (slowy) modded 1961 Beetle build.Bloody hell - this is nice work 👍
Futue te ipsum!!!
boost guage??? hehe
how did you get the front clip so straight???
coming along mate. awesome.
nick
I know what a buldging disc in your back is all about mate. Have had one since the week before easter and it still isn't right.
ACCEPT THAT SOME DAYS YOU ARE THE PIDGEON AND SOME DAYS YOU ARE THE STATUE
Alder Outlaws VW Racing - check it out on fb!!
