Rocker geometry HELP!

2,577 posts · joined May 2004 · 2 Aug 2008, 5:31 pm

#661341

Rocker geometry HELP!

I' after some assistance from a geometry guru to assist me with the correct push rod length for my combo.

Engle 110 cam, with Empi 1.25:1 Rockers, Scat 69mm crank

When it comes to technical mathematical equations, I'm not your man.

Thanks in advance
Peter / Bones

mactaylor Custom Title Time!

1,005 posts · joined Aug 2007 · 2 Aug 2008, 6:40 pm

#661360

make an adjustable pushrod like damien pells dangerous should jump in here too

EVERLAST CONCRETE TANKS
1800 552 123

VWFREAK VWFREAK

2,577 posts · joined May 2004 · 2 Aug 2008, 7:20 pm

#661363

I figured as much. I'm trying to take the guess work out of it and have an exact measurement for guidance. If in doubt ? Ask some one who knows.

Not very forgiving if you get it wrong.

Anyone else.

xornge666x Wolfsburg Wizard

460 posts · joined Sep 2006 · 3 Aug 2008, 1:53 am

#661391

If you wear glasses, you are sure going to need em to read this, but decent info here
http://www.cbperformance.com/Oct2005.asp

hellbugged 48's and straight cuts

5,080 posts · joined Apr 2003 · 3 Aug 2008, 6:44 am

#661392

there is no set length........

it will all depend on YOUR engines width, finished valve stem height head castings height etc etc etc

search my engine build out, it may have pictures but i'm sure there is decent description

and also look through here..........

http://www.shoptalkforums.com/viewtopic.php?t=107350

VWFREAK VWFREAK

2,577 posts · joined May 2004 · 3 Aug 2008, 2:45 pm

#661414

Thanks for the info guys.