Genny red light??

bigdave Officially Full-On Dubber

329 posts · joined Aug 2006 · 3 Jan 2009, 5:07 pm

#687122

Is this the correct positioning of the wires on the genny? I removed it to inspect but after I reinstalled it the red light stays on. Anything else to look for??

Cheers

pod i`ve got to finish this thing one day

4,980 posts · joined Dec 2003 · 3 Jan 2009, 6:57 pm

#687138

mine has red wire to left terminal ,green little one to the right ,and brown screws into the genny case🙂

meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook https://www.facebook.com/FlatFour

helbus Administrator Mad fabricator, paint and body

7,386 posts · joined Sep 2002 · 3 Jan 2009, 7:09 pm

#687139

Ours is the same. Large red wire to the left. small green wire to the right and brown wire on the generator case back behind where the clamp is.

EJ22 into Bay Microbus - Finished project build thread- click on this spot here for info

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 · 3 Jan 2009, 8:30 pm

#687165

where does that black wire connected to D+ go to??
looks like down to the brush?
thats unregulated power and shouldnt be connected to anything cept the regulator

D+ on the left should only have the big red wire to the corresponding terminal on the regulator and DF on the right same deal green wire to DF on the reg

are all the connections on the regulator right?
any chance of pic there?

bigdave Officially Full-On Dubber

329 posts · joined Aug 2006 · 4 Jan 2009, 8:14 am

#687196

Joel, that small black wire goes up inside the genny - not sure where it connects to but it is not to a brush. Its strange because all of the manuals I have seen only mention the other two wires. This is a later model D1 1200 motor - dont know if they are any different. Anyways it is not producing any charge so time to remove and take in for an overhaul.