Hi all ,
As seen below we have plenty of GOOD second hand parts for most models .
So if your looking for that odd part more than likely we'll have one .
Don't let body work get in the way of real suspension travel
hey andrew -
This is wacky - I need to drop some gear off for Dan tomorrow (I hope he's arranged it with you!) and I was just looking at your website and saw you were only open mon-fri ...so was going to put a post up here to see if that was the case...and you beat me to it by 6 mins.....thats great service!
btw - do you align bore T1 cases?
Sorry we don't do line boring , but i can arrange for it to be done for you and yes i know about Dans gear
Don't let body work get in the way of real suspension travel
great news for those of us who are slaves Monday to Friday🙂
Well thank those who are slaves Mon-Sat......
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
thanx 😉
Amongst some of our hidden treasures here at custom are the following .
This Trip Speedo is in great condition and as rare as these are we would be looking for offers over $350.
Sorry i cannot read the date on the rear
Don't let body work get in the way of real suspension travel
We also have these 50/50 taillight lenses , a little faded and would suit a great rat 60/61 beetle
Don't let body work get in the way of real suspension travel
Plenty of other tresures hidden upstairs too .
Single port Weber manifolds
1200 & 1300 tinware by the drum full
Plenty of good straight rust free beetle doors from 62 - 76
3 off lowlight bay front bumpers ( 1off is even a deluxe with horizontil overiders )
A pair of primered and straight late type 3 guards ( Have had rust repaires to bottom and are fully welded patches )
Plenty of aftermarket seats
A set of type 3 Z bar armrests
15 odd late beetle deck lids some no vents some 2 vent some 4 vent , plenty of each to chose from .
Approx 3 complete baja kits ( Not all kits are a full matching set )
Don't let body work get in the way of real suspension travel
oh how I wish I had money. 🙁
andrew, do you have a manifold that would suit a weber dcn14/holley bug spray????
im looking for one for my bugspray that has pre heat tubes or at least a brace to the case bolt for my single port engine. 3 peice style is ok, ive got single port end peices.
Nicko
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
Nick you have 3 to choose from .
I will post some more photo's soon
Don't let body work get in the way of real suspension travel
nice one!! cheers andrew, ill be in brissy on wednesday thursday. so i can drop in if its what im after.
Nicko
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
A bugspray has a similar bolt pattern to a dcn weber yes ??? and what size heads have you got 1300 or 1500 as the inlet holes are different dia
Don't let body work get in the way of real suspension travel
its the same bolt pattern as a dcn 14 weber (the later one with 4 bolts not the older 3 bolt weber)
heads, thats a good question, is there an easy way to check? did VW not make 1600cc sp heads?
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
Anthiron wrote:heads, thats a good question, is there an easy way to check? did VW not make 1600cc sp heads?
Yes they did but i think they are the same inlet size as 1500 heads .
As for which ones you have , there is only one way sorry to say and that is to pull of your existing manifold and measure the holes although now i think about , mabey its only the inner part of the stepped inlet hole that is a different dia from 13 to 1500 heads which in that case my manifolds will definetly fit which ever head you have .
With your bugspray base being the same as a dcn i have definetly got at least 3 different manifold that will suit what you want and 1 is even a nice cromed one although it doe's need a good polish and they all have good heat riser tubes as i don't believe any of them have ever been fitted to an engine
Andrew
Don't let body work get in the way of real suspension travel
sounds great andrew, how much for the shiny one😏??
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
ive got a few DCNF manifolds kicking around and also had a bugspray on a single port manifold as well but chucked it
the bugspay does have a smaller bolt pattern than DCNF but most DCNF manifolds have the holes slotted so u can squeeze a bugspray on
nick if ur worried about stabilising the carb/manifold without a preheat i made up a bracket for one of mine that bolted to the case cos the preheat had rotted off and it flopped around
let me know if u need pics and lengths etc
joel yeah ive seen the brackets, if you have dimensions that would be fantastic, (sorry, bit of a thread hijack)
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
Go to CVD everybody, the staff are awesome. 🙂 (espeically pete)
ive started another thread for this topic in tech talk, sorry andrew
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
Andrew, do you have any single DCNF manifolds??
any second hand sets of 4 stud wide 15inch rims for the baja Andrew?
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
I don't think so man, I have been calling everywhere to find some including custom vee dub. I am looking into getting some made.
you've got a PM andrew👍
Hey, dunno if this is old thread or whatever but what aftermarket seats do you have, i am looking or a pair.
Cheers Josh
