I have to say it. headlight eyebrows just look very ordinary and vws dont need any thing to make their headlights worse
there is a factory in taiwan cranking these things out and it has to stop asap in the name of good taste
I feel better now
I think Ill go and have a good lie down
Ok in the name of good taste I will remove the abovementioned offending items from my bug 😂
If it's not in a Vee Dub I'm not going!
don't tell slim my ute he will get ya he makes my life a misery and he likes me
👍👍😂🙅🥷😬🤓
zjm wrote:I have to say it. headlight eyebrows just look very ordinary and vws dont need any thing to make their headlights worse
there is a factory in taiwan cranking these things out and it has to stop asap in the name of good taste
I feel better now
I think Ill go and have a good lie down
What about the safety issues with sharp things like these slicing into pedesperates.
DH
yea, for the issues of having a lack of safety and good taste they will have to upgrade to sharp 6 inch barbs/spikes welded across the bumper instead.
Now that would be sick! 😏
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
zjm wrote:I have to say it. headlight eyebrows just look very ordinary and vws dont need any thing to make their headlights worse
there is a factory in taiwan cranking these things out and it has to stop asap in the name of good taste
I feel better now
I think Ill go and have a good lie down
I LIKE EYEBROWS/EYELIDS!!!! BUT in saying that, i just removed the ones off my car to improve how it looks and have got to say it REALLY improved the look... so i really cant talk ahahaha
😂😂
VW - helping put oil back into the ground for over 60 years
Get nicked. Just my opinion.
This is why the world is so enjoyable. I personally like them.. stuff the safety issues. My 54 doesn't have seatbelts either.
If we all had the same ideas, tastes and thoughts the world would be very boring!
T54
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
Safety issues??
They are rounded on the ends and have NO protruding sharp edges unlike my bumper bar.
I think the handle on the bonnet would cause more damage so mine are staying.
Whadaday
Each to their own though.
Got a great big fibre glass kit with front bumper spoiler. rear wing and flared guards to come when I get em ready.
More for people NOT to like. Lucky it's only me driving it.😘😂😘😂
I'm sure pedestrians getting hit are gunna be pretty f@#$ed up with or without eyebrows attached!
Or a bull bar
Hi
I don't like them, they looked cool years ago when they were rare, now there are thousands of Chinese ones around they have lost their style.
But each to their own, I do things to bugs that other people find distasteful, but they are my bugs.
We don't want the VW style police to get started on these things, we would all drive the same looking car then.
Steve
I personally have an issue with their safety
If the RTA had to make a ruling on them I think they would be outlawed
I would also hate for my insurance company to see them
this is the RTA's opinion on protrusions they really only applies to bull bars and aerials
Protrusions on vehicles
Some vehicles are fitted with badly designed bull bars with pointed corners and sharp edges, and some are fitted with accessories which protrude beyond the bumper bar or bull bar.
Protrusions and some methods of attachment to the front of vehicles present a danger to other road users and increase the likelihood of injury or damage to a person or another vehicle making contact with the vehicle. An accessory or bull bar fitted to a vehicle must therefore be attached in a manner that does not affect the continuing compliance of the vehicle with the Australian Design Rules and Regulations.
This information covers only the roadworthiness requirements for equipment fitted to the front of vehicles. These roadworthiness requirements and the relevant construction safety standards will be reviewed after Standards Australia completes a proposed Australian Standard on bull bars.
Fitting of accessories
Of particular concern are the ways in which items protruding forward of the bumper or bull bar are fitted eg. accessory fittings attached to the exterior of a vehicle such as brackets supporting aerials and lights.
Also of concern are bull bars that have sharp edges and pointed corners or bull bars fitted with accessory attachments such as fishing rod holders, lights and mounting brackets for such fittings, and any fittings that affect the field of view of the driver.
For safety reasons it is illegal to have:
Any attachment or protrusion projecting forward of bull bar or bumper bar which presents a danger to other road users.
Note that any aerials or winches which cannot meet this requirement should be removed after the operational need is completed. Emergency and rescue (State Rescue Board-accredited rescue vehicles, mines rescue) vehicles may have a constant operational need for this equipment and will not be rejected. Minor protrusions forward of the bull bar or bumper bar such as a spotlight, or fairleads required for the operation of a winch, where the mounting brackets do not protrude, are permitted providing the protrusion is the minimum necessary and is blunt or protected to minimise any risk of injury to vulnerable road users.
Any sharp or ragged edge or corner on a bull bar which could cause injury to a person coming into contact with the bull bar.
Any bull bar or other attachment that does not allow the driver a view of the road and of the traffic to the front and side of the vehicle so that the driver can drive the vehicle safely.
The RTA has issued Vehicle Inspector's Bulletin No. 5 to Inspectors and Authorised Examiners explaining the inspection requirements to them. For further information on protrusions to the front of vehicles, please contact RTA Technical Enquiries on 1300 137 302.
Keeping it real !
theyre already classed as illegal and yes u can booked for them, but not many ppl do, just advised to remove them
there are proper ones for late model headlights that fit properly,look ok and dont cover half the headlight up but noone seems to fit them only the ones designed to fit early bugs which look like shit on late model upright headlights
zjm wrote:vws dont need any thing to make their headlights worse
i think that these were actually designed to improve 6V headlights by reflecting more light down where you need it.
that said they were made illegal in germany back in the day as they were slicing up too many pedestrians, plus i have never liked the look.
it is the diversity that makes the hobby so i won't tell you to your face that they make your car look a bit gay.
🙂yup i hate them
i have two new sets if anyone ways one
BUY A REAL BUG A PRE S BUG...
Legal or not I don't mind them at all. The new Taiwan and Chinese one are pretty horrid though. But most dress up stuff from there is.
Here's and older set of thigh slicers.
They probaby cause a very slight drop in fuel economy too
Wes -
www.offroadvw.net - 200HP Quad Cam V6 in a VW Baja - with climate control...
🙂
www.taylorcycles.com.au - My DH MTB racing brothers shop.
Brad, yours are atleast the proper ones designed for 12volt headlights not the old 6volt style that cover up half the headlight and make bugs and kombis look totally stoned
people really add insult to injury when they angle them for the angry/sad look
Joel wrote:Brad, yours are atleast the proper ones designed for 12volt headlights not the old 6volt style that cover up half the headlight and make bugs and kombis look totally stoned
people really add insult to injury when they angle them for the angry/sad look
The newer style ones look pretty crap on the earlier beetles to, all pointed upwards. These were an absolute bitch to fit. I swear it took half a day to fit them. If I knew they were going to be so hard I would of told the missus to get stuffed. But hey, I am a softy!
What about Cat's eye's Yay or nay?
I say nay.
Can you have cats eyes and eye brows?
I just ran and had a look at our cat and he does have eyebrows
get he origional german ones there BRASS not china shit n they looks great hd them for years both cars
I say yay to cats eyes 👍
I love my Bel's eyebrows, they add to her personality and were part of the reason I fell in love with her when I first saw her parked by the road with a for sale sign xoxo
Someone would have to be getting up too close and personal to your ride for them to be a safety hazard🙁
I love them, but hate them on late model beetles!
1963 Single Cab Ute: "El Concreto"
1962 Baja Beetle: "Peanut"
1968 Porsche 912 SWB: "Pip"
1972 Kombi Snail: "The Snail"
2012 Skoda Octavia Scout: "Scout"
2016 Scirocco R: "Rocco"
A face would look just wrong without eyebrows!! I have eyebrows on my 57 bug and my 74 bug and am looking for a pair for my NB.
There are many modifications that I dont particulary like but I don't go saying how much I hate them!
🤘
cats eyebrows.... i laughed
ihad them and like the look of them but took them off because i couldnt get a good seal with them on, started taking in water. yeah they are sharp too only takes one tool to play with them in a car park to cut themselfs
🙂
I believe they were introduced to keep the headlights clear of snow and subsequent icing up of the glass when the car's parked. So unless you're expecting snow or they're the real thing on a pre 68 beetle, I'm with you zjm, there's no excuse. 👎
