Drilling For stud pattern....

learjet79 Commited Dubber

60 posts · joined Mar 2008 · 16 Jul 2009, 4:22 am

#724279

Where in melb can i get my rotters and rear drums drilled for eitheer 4 or 5 stud pattern, 4x100 or 5x114.3 prefer 4x100???

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 16 Jul 2009, 9:00 am

#724297

Send eum up to Sydney

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

polak Everything is alright with enough Vodka :P

913 posts · joined May 2009 · 16 Jul 2009, 9:44 am

#724299

vw54 wrote:Send eum up to Sydney

hahaha! thats hardly helpful Birchall! 😂😂

VW - helping put oil back into the ground for over 60 years

amazeer Bishop of Volkswagenism

3,029 posts · joined Nov 2005 · 16 Jul 2009, 4:50 pm

#724330

Any engineering machine shop should be able to do that for you. Its a first or 2nd year aprentice job.

greedy53 Bishop of Volkswagenism

3,062 posts · joined Mar 2006 · 16 Jul 2009, 7:33 pm

#724374

i had a plate of steel made years ago, that is bolted onto a disc or drum using the wheel bolts and has guide holes for drilling 4 x 100 holes and i use a drill that come with wheel studs very cool, works great didn't cost a million nearly

👍👍😂🙅🥷😬🤓

grumble Son of Jim - Creator of Good

2,672 posts · joined Jun 2008 · 16 Jul 2009, 8:45 pm

#724393

Be careful redrilling standard rotors as they are strengthened at the original holes and are thinner between.

learjet79 Commited Dubber

60 posts · joined Mar 2008 · 16 Jul 2009, 10:31 pm

#724417

arn't spacers ilegal?????

1500S Custom Title Time!

1,418 posts · joined Mar 2005 · 16 Jul 2009, 10:55 pm

#724426

learjet79 wrote:arn't spacers ilegal?????

I think you will find that Greedy53 used the plate as a drilling jig, not a spacer.

DH

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 · 16 Jul 2009, 10:59 pm

#724428

i spin mine in a lathe to get perfectly true PCD

4x100 fits nicely inside the stock 4x130 and picks up the original webbing well if u slightly offset the holes abit so theres plenty of meat between them

hellbugged 48's and straight cuts

5,080 posts · joined Apr 2003 · 16 Jul 2009, 11:46 pm

#724434

learjet79 wrote:5x114.3

is that ford or commodore pattern.....may have four wheel discs for you if so

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 · 17 Jul 2009, 4:46 pm

#724549

ford/toyota/nissan etc

holden and BMW are bout the only 5x120 mainstreamers

BUGBOY Moderator Chief Toy Dude / Head Cruiser

2,147 posts · joined Aug 2002 · 19 Jul 2009, 8:16 pm

#724869

I can machine them for you, or supply blank rotor and hubs and machine them also.

Everything 36HP !
Change over king and link spindles
6-12volt semaphores

Find us on Facebook