Seller: Toby
Location: Dural 2158 Sydney
Item: Haltech S3 hall effect sensor, type 3 pulley with Haltech rare earth magnets fitted, M&W dual channel ignitor and 4 post coil pack
Condition: good
Price : $200 cash or bank deposit
Contact: post here, PM or email briaros at optusnet.com.au
A great way to finally lose that dizzy once and for all!!
I bought this around 6 months ago and ran it on my type 3 successfully using a megasquirt II ecu. I have just changed to EDIS and no longer need these. Suitable only for an aftermarket EFI computer such as Haltech etc
The magnets on the Type 3 pulley are installed 180 degrees apart...one faces north and one faces south. The S3 actually sends 2 different signals to the ECU per rotation of the crankshaft...one every 180 for crankshaft position and one every 360 which provides a "home" signal and allows you to run a coil pack with wasted spark if your ECU allows it. The sensor alone is well over $150 to buy new!
Pickup or postage Australia wide
Useful info below on the Haltech s3 sensor and M&W ignitor...and the coil pack is from a hyundai and cracks out one mean spark!
http://www.tweakit.net/shop/product_info.php?products_id=185
http://www.haltech.com.au/downloads/connectors/s3_and_s4_hall_sensors_with_plug.pdf
http://www.thor-racing.co.uk/files/Double9A.pdf
type3lover in the garage...
796 posts · joined Feb 2005 ·
.
