Skip to content
Aussieveedubbers

Suspension travel

0 likes
Share Share on Facebook Share on X Share on Reddit

donn Wolfsburg Elder

3,515 posts · joined Nov 2005 ·

#733714
By buggy has a beam front end (what else would it have 🤪) the car has been droped on its guts but I need to find out how much wheel travel I have left , bugger all if the ride quality is any indication, as I want to fit some indicators directly over the wheels and the globe holder will hang down through the guard, I don't want to go drilling holes to take the fitting if the wheels are going to rip the globe holder apart when the wheel reaches the top of its travel. Whats the best way to find out where the top of the travel is and therefore how much clearance I will have between the tyre and the guard?
Thanks
Don
I dream of a day when a chicken can cross a road without being asked for it's motive!

Anthiron The Baja Rejuvenation Begins

4,936 posts · joined Oct 2003 ·

#733715
just jack up your front suspension to full jounce and see how much clearance you have. do you run bump stops?
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom

donn Wolfsburg Elder

3,515 posts · joined Nov 2005 ·

#733716
What I have done so far is to measure between the tyre and the guard when resting on the ground, then I jacked the car up under one front shock as far as I could (the other front wheel was almost off the ground), I then measured the difference over the wheel, but I suspect that the suspension may travel a little further under road / driving conditions.
I dream of a day when a chicken can cross a road without being asked for it's motive!

donn Wolfsburg Elder

3,515 posts · joined Nov 2005 ·

#733717
No bump stops Nicko, seems I was out there doing what you suggested while you where suggesting it.😁
I dream of a day when a chicken can cross a road without being asked for it's motive!

Anthiron The Baja Rejuvenation Begins

4,936 posts · joined Oct 2003 ·

#733719
what u need to do is chain the beam to the jack somehow so you arent just jacking the car up but compressing the suspension only. make sense?

be carefull not running stops, on a street car you might get away with it. but if u bottom out your shocks you will get a surprise.
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom

donn Wolfsburg Elder

3,515 posts · joined Nov 2005 ·

#733720
Yep, got that, back for another try, thanks.
I dream of a day when a chicken can cross a road without being asked for it's motive!