Skip to content
Aussieveedubbers

Another Filipino Country Buggy...

0 likes
Share Share on Facebook Share on X Share on Reddit

bErT_12 Learner Dubber

11 posts · joined Nov 2009 ·

#745017
Hi there...

Im Roberto, a 17 yr. old guy who's fascinated with volkswagens... I got this passion for vintage volkswagens maybe from my father... I'm glad i found a site like this that is tackling more about Country Buggies... Because i myself has many ??? (questions) about the said, rarest Volkswagen... I'm also a proud owner of a Country Buggy (I believe it is a Country Buggy despite that i'm not able to locate the KO number)... Im looking into 2 factors why i can't locate the KO number... 1st factor, maybe the place where the KO number could be found was already repaired by the previous owner or 2nd, maybe my country buggy doesn't really had a KO number at all (because Mr. Bill Moore said that CB's that were exported here in the Philippines doesn't have KO #)...

My CB is under restoration... But this picture that i will attached was captured when the restoration was not yet started... (im sorry for a low resolution picture)

1 attachment · Log in to view

bitemeoz Officially Full-On Dubber

355 posts · joined Oct 2003 ·

#745023
nice mate, im in manila at the moment - havent seen many vw's around at all. 1 beetle in 7 days so far.

ztnoo Insano Dub Head

730 posts · joined Aug 2007 ·

#745024
Roberto,
Welcome to the CB Forum! This is a great place to find out about CBs and what other guys are doing with their vehicles.
Graham's picture Gallery of CBs is a great resource too. Check it out.

I think the explanation given you by Bill Moore is the correct reason. But whether it's a KO'd CB or a Sakbayan, to me its pretty much the same.

Why don't you record a pictorial history of the progress of your restoration and keep us informed here at the CB Forum? I'm sure others would very much like to keep attuned to your progress and see what the end result is.

Regards,
Steve

Fine tuning the proper daily ratio of Maxwell House to Bacardi 151.........

* Don't worry about the world coming to an end today. It's already tomorrow in Australia !

bErT_12 Learner Dubber

11 posts · joined Nov 2009 ·

#745076
bitemeoz wrote:nice mate, im in manila at the moment - havent seen many vw's around at all. 1 beetle in 7 days so far.
It's nice here that you're at Philippines sir... Maybe i could invite you to attend to the Philippines' Annual Volkswagen Carshow this coming December 6 2009... Maybe there you could enjoy the view of Volkswagens gathering only in one place... For more details 'bout the said event, you could visit Volkswagen Club of the Philippines website, www.vwcp.org

Regards,
Roberto

bErT_12 Learner Dubber

11 posts · joined Nov 2009 ·

#745081
ztnoo wrote:Roberto,
Welcome to the CB Forum! This is a great place to find out about CBs and what other guys are doing with their vehicles.
Graham's picture Gallery of CBs is a great resource too. Check it out.

I think the explanation given you by Bill Moore is the correct reason. But whether it's a KO'd CB or a Sakbayan, to me its pretty much the same.

Why don't you record a pictorial history of the progress of your restoration and keep us informed here at the CB Forum? I'm sure others would very much like to keep attuned to your progress and see what the end result is.

Regards,
Steve
Thank you for a very warm welcome sir Steve... I already enjoyed browsin' at sir Graham's CB photo gallery... (How i wish my CB would be included in that gallery... haha!!!) Anyways, I'm also looking forward on documenting my CB's restoration progress here in this site/forums... And I'll start it, NOW... 😎 This restoration progress begun 1 1/2 ago and it is still going until now... Here are the pictures...

4 attachments · Log in to view

bErT_12 Learner Dubber

11 posts · joined Nov 2009 ·

#745085
Some more pictures of the restoration process...

3 attachments · Log in to view

bErT_12 Learner Dubber

11 posts · joined Nov 2009 ·

#745093
Those pictures that i posted were just part of my own documentation of my CB's restoration... For more pictures, just this, http://www.vwcp.org/forum/viewtopic.php?t=10795

And now this are the latest update for my CB's "make-over"... (pictures taken just a few days ago)

3 attachments · Log in to view

VWCOOL 23 Windows of Awesome

5,158 posts · joined Jun 2003 ·

#745096
Excellent work, Bertie, and welcome to the forum!
Pay your debts, CxxT

11CAB If ya got it....Baja it

4,674 posts · joined Aug 2002 ·

#745129
Wow, thats a lot of work gone into that. I'll add an album for it into the Gallery
Cheers
Graham
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab

Yogie Moderator Custom Title Time!

1,608 posts · joined Jun 2003 ·

#745135
With all the work this car needed, you have truly saved it. Many people would have given up on it and let it go to waste.

Congratulations to you for an excellent job and keeping this alive for the rest of us to see and gather inspiration from.

Yogie

bevoracing Officially Full-On Dubber

327 posts · joined Jan 2009 ·

#745154
Picture DSC07925 is interesting. The stub axle assembly is installed upside down. I'll have to think about that. Definitely give it a radical lowered effect. Was that the idea Roberto?
Country Buggy King & Link Pin Overhauls, Type 1 & 2 King Pins, General Machining.
http://forums.aussieveedubbers.com/viewtopic.php?tid=74138
My car is KO813

bErT_12 Learner Dubber

11 posts · joined Nov 2009 ·

#745316
Sir VWCool and sir Yogie, thanks for your very nice and heart-warming comments...

Sir Graham, whoa!!! thank you very much... It is such an honor for me that my buggy would included in your gallery... Thank you...

Sir Tony, what a??? your right, the stub axle was installed upside down!!! No sir, it's not the idea... Just a simple mistake made by me myself and my father who re-assembled the front end... Thanks to your great observation... Maybe this is the opportunity to ask what should be done to correct the mistake that we've committed...

11CAB If ya got it....Baja it

4,674 posts · joined Aug 2002 ·

#745321
Bert, do you know of any other Country Buggies over there?
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab

bevoracing Officially Full-On Dubber

327 posts · joined Jan 2009 ·

#745352
Roberto
Looks like you’ve simply put the left hand stub on the right hand side etc. Take the link pins out and swap the stub assemblies side to side and it’ll all be good. There’s some pictures at:-http://forums.aussieveedubbers.com/viewtopic.php?tid=74138

For anyone thinking of using that trick to radically lower something, it won’t work straight away. There are no thrust washer in the king pin to take the load in that direction, even if you could get the steering arm to reach. All you’ll get is bad wear and possibly a seizure. I guess the ling pin could be modified to get at least 1 thrust washer in there. Might be better to turn a Kombi stub upside down so the pitman arm is on the top again? There’s plenty of other ways to lower a front end anyway.
Cheers
Tony
Country Buggy King & Link Pin Overhauls, Type 1 & 2 King Pins, General Machining.
http://forums.aussieveedubbers.com/viewtopic.php?tid=74138
My car is KO813

ztnoo Insano Dub Head

730 posts · joined Aug 2007 ·

#745362
Roberto, et al,
I am absolutely thrilled with your post concerning your pics.
It has awakened the forum I know is out there.......just not as responsive as some of us would wish for.
I think you have finally engaged the gears here at the CB Forum, and I encourage you to continue in this fashion.
Tony's observations about the stub axle assembly is an superb example of what is possible here when posters engage the masses with relevant and exciting new information and include pics and potential mechanical problems.
What a breath of fresh air.
Amen.
👍

Regards,
Steve

Fine tuning the proper daily ratio of Maxwell House to Bacardi 151.........

* Don't worry about the world coming to an end today. It's already tomorrow in Australia !

cb john Wolfsburg Wizard

470 posts · joined Jun 2007 ·

#745422
Roberto, 👍👍

bErT_12 Learner Dubber

11 posts · joined Nov 2009 ·

#745487
Sir Graham, yes i know some other Country Buggies/Sakbayans here in our country... I actually have some of their pictures... It's just that i'm not that "close" to the owners of those precious metals... The red Sakbayan in your gallery belongs to Mr. Sam Baldado, the former President of the Volkswagen Club of Philippines... While the lowered beige sakbayan belongs to Mr. Tox Joel of V.W.C.P. Pampanga Chapter... Maybe on some other day i could post my own collections of photos of CB/Sakbayan here in our country...

Sir Tony, now i know... Thanks for the info... Maybe when we're already in the process of assembling car, we could correct our mistake...

Sir Steve, I'm very greatful for what you've said... I hope this thread would continue to inspire some other people who's in the process of restoring their rides...

Sir John, thank you for the applause...

Regards,
Roberto

58camper Wolfsburg Wizard

591 posts · joined Aug 2002 ·

#745510
Bert,
Good to have you on board the Forum together with all the serious work you are putting into your CB.
You wont find a KO number on your vehicle as it looks to be one of the LHD units exported to the Philippines and then assemble over there. The front steps set into the side sills suggests to me that it was local assembly there and not here in Australia.
There is certainly some work there but it looks to be proceeding really well.
Using the Forum is a great way to gain advice and assistance and with Graham collecting all the photos it goes along way to helping each other get through the restorations.
Keep up the great work.
countrybuggybill.

bErT_12 Learner Dubber

11 posts · joined Nov 2009 ·

#746005
Sir Bill, i can't imagine that now, i could communicate with you sir... before i'm just reading your history 'bout CB's but know, i could really communicate with you (even via internet only), a dream-come-true for me!!! Now it is clear to me that my CB was assembled here in our country, not there in Australia... And I also knew that the steps on the side sills is one of the indications that a CB was assembled here in the Philipines... Thank you sir Bill!!!

Regards,
Roberto

Updated pictures of my CB, body works on the rear part, almost DONE!!!

3 attachments · Log in to view

bErT_12 Learner Dubber

11 posts · joined Nov 2009 ·

#1039177
Hi everyone!

It's been 9 years since the last post i made in this forum. The country buggy is still with me, but didn't have the chance of finishing the restoration (because of other bugs got its way). 😂

I would still want to make this thing run, at least. I'm planning to fix the mechanical stuffs, or get a rolling chassis from another bug and leave the body as is. Will a late chassis (came from a 68 or later bug) being mated to the country buggy shell be a bolt on process?

I believe this forum is still the best place to ask about ACB's and i'm looking forward of hearing from you, mates! Happy new year!

Best regards,
Robert

bErT_12 Learner Dubber

11 posts · joined Nov 2009 ·

#1039179
Been searching and browsing Facebook about Bill Moore. I'm totally saddened to know he passed away March 2014, almost 4 years ago. 🙁

bevoracing Officially Full-On Dubber

327 posts · joined Jan 2009 ·

#1039219
Hi Robert
Good to have you back. Young Bill is still sorely missed around here.
The late chassis will bolt on with a bit of a touch up of the shock tower mounting point. I'm sure you can handle that. Keep us informed.
Cheers Tony
Country Buggy King & Link Pin Overhauls, Type 1 & 2 King Pins, General Machining.
http://forums.aussieveedubbers.com/viewtopic.php?tid=74138
My car is KO813

ztnoo Insano Dub Head

730 posts · joined Aug 2007 ·

#1039223
Keep up the good work, Robert!
Please keep us informed and take lots of pics.
We love pics of CBs here at the CB forum.
Regards,
Steve

Fine tuning the proper daily ratio of Maxwell House to Bacardi 151.........

* Don't worry about the world coming to an end today. It's already tomorrow in Australia !