Ok , Today I contacted head office of Clark Rubber and they where happy enough to look back into old files and fine the information for the rubbers that they made for Country buggies.
They can supply front bonnet and rear engine compartment and also windscreen rubbers.
They are going to contact me with a price for each unit ,so I was wondering does anyone need any of them?
I will list the price as soon as I know them and then I will arrange to have them done.
Nathan
Everything 36HP !
Change over king and link spindles
6-12volt semaphores
Just an update, they rang today and they are able to supply windscreen and front bonnet, but not the engine lid seal at this stage but will check the profile on Monday.
Everything 36HP !
Change over king and link spindles
6-12volt semaphores
ArtyP wrote:I will need a new set too please I take it that the windscreen rubber is the one under it the one that holdes the glass in on mine is ok regards ArtyP
No we are talking about the windscreen seal rubber.
Everything 36HP !
Change over king and link spindles
6-12volt semaphores
Nathan Front and Rear and Screen
Lee F R S
ArtyP F R S
auditwmba F R S
Craig Torrens F R S
funkmaster red F R S
Chase F R S
Bevoracing F R S
luftwagen S
Everything 36HP !
Change over king and link spindles
6-12volt semaphores
Find us on Facebook
Craig Torrens6 times Australian, 7 times State Hillclimb Class Champion
Regards those rubbers I have checked my windscreen and the rubber looks ok but if you have ordered them thats alright I will take it I will also need the rubber that goes under the screen to seal it between the body it looks like a simple one though . And the rubber seal around the motor are they standard VW or can anyone tell me where to get one I have just pulled my buggy out of the shed under 10 years of junk and am finding some things it needs
OK, I'm still confused..... the windscreen seal, is that the one that holds the glass into the frame? Is it 4 seperate pieces or one piece? Also can we get these from our local Clark Rubber, or will they need to be sent up from Melbourne?
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
Hi Graham,
the Windscreen Rubber is the one that holds the glass to the frame and it is one piece.You can order the rubbers from your local Clark Rubber Store but you have to wait a few days for it to come from were it is made.These are the part number and price from 2007 which if Nathan can buy in bulk should get a better price.
Boot - 225.053 - $79.95.
Bonnet - 225.054 - $79.95.
Windscreen- 218.834 - $139.00.
Cheers Craig.
CB CRAIG wrote:Hi Graham,
the Windscreen Rubber is the one that holds the glass to the frame and it is one piece.You can order the rubbers from your local Clark Rubber Store but you have to wait a few days for it to come from were it is made.These are the part number and price from 2007 which if Nathan can buy in bulk should get a better price.
Boot - 225.053 - $79.95.
Bonnet - 225.054 - $79.95.
Windscreen- 218.834 - $139.00.
Cheers Craig.
Thats correct Craig, prices have gone up a bit since then but i'm hoping to get one batch done. This should cut the cost as they have to make them ,so it should work out a bit cheaper if they know they have a few to do.
I'm looking to get the price at the end of this week with what number we come up with.
Everything 36HP !
Change over king and link spindles
6-12volt semaphores
Find us on Facebook
Craig Torrens6 times Australian, 7 times State Hillclimb Class Champion
The new price for ordering 8 sets of each of these rubber seals are as follows:
boot: 225.053 was $120 each, 8 units will cost $90.0 each
bonnet; 225.054 was $120 ea , 8 units will be @ $90.0 each
windscreen: 218.834 was $149.95 , 8 units will cost @ 125.0 eac
All prices are inclusive of GST
Yes ,you still need to supply us with sample of boot rubber so that our supply can match it.
I hope these prices will meet yuor expectations
Due to the closure of our rubber supplier over xmas 2009, till jan 12th , we wiil not be able to supply before january 2010.
Regards,
Pino
So I will be dropping of the rear boot seal sample and we are set to go.
Nathan😎
Everything 36HP !
Change over king and link spindles
6-12volt semaphores
Ok looks like we are ready to go ahead with this order.
I just need those that where interested to confirm with me on this. If your not on the list and you wish to be , please let me know which rubbers you need.The new price for ordering 8 sets of each of these rubber seals are as follows:
boot: 225.053 $90.0 each
bonnet; 225.054 $90.0 each
windscreen: 218.834 $125.0 each
I'll send a message to all those on the original list to let them know we are going a head with this.
Nathan Front and Rear and Screen
Lee F R S
ArtyP F R S
auditwmba F R S
Craig Torrens F R S
funkmaster red F R S
Chase F R S
Bevoracing F R S
luftwagen S
Loyed F R S
Everything 36HP !
Change over king and link spindles
6-12volt semaphores
Hi Nathan I sent you a PM the other day dont know if you got it I may not have done it properly but I want the 3 rubbers please let me know where to send the money its burning a hole in my pocket I really, appriciate you doing this, I will be in Melb in march so I can pick them up from you then to save the trouble of sending them to me Regards Art
